NEWS - ilB2B.it

Promotional message
Timeless advanced technology and
consistent quality. These are the
hallmarks of Eural Gnutti, a reference
point throughout the world for the production of
semi-finished aluminium products.
The story of this Brescia-based organisation
began some time ago, in the years following the
end Second World War.
In 1947 the Gnutti family was actively involved in
the metal production sector, operating one of the
Gnutti family from left to right
Paola, Sergio, Giuliano, Elena.
Headquarters in Rovato extrusion plant.
largest industrial centres for the production of
extruded and drawn materials in brass, with a
smaller output of extruded aluminium products.
Despite its relatively recent introduction,
aluminium soon gained a significant foothold in
all industrial sectors.
A great leap forward in the company’s
development took place in 1968, with the
establishment of a new industrial entity, Eural
Gnutti, where the name Eural combines the two
most important elements in the company’s
history and success – Europe and aluminium.
From the outset Eural chose to follow a
22
Progettare International
Eural Gnutti
philosophy based on human values and
uncompromising professional principles –
conviction and deep commitment to the work, an
emphasis on research and development,
investment in cutting-edge technology, punctual
delivery and constant product evolution, leading
to outstanding quality levels.
In the 1970s the company management saw,
with exceptional entrepreneurial vision, that the
company’s future success rested on two areas
of production – opening its own foundry and
developing new aluminium alloys.
However the greatest achievement has come in
the last 15 years, with the intrduction of new
lines and the acquisition of new machinery, the
research and ongoing development of new
alloys for internationally famous commercial
partners, the conquest of global European,
American and Asian markets, and the
completion of a far-reaching aim – to develop
the ability to handle every production phase
within the company, and to be able to use
standard and customised products for the most
demanding clients.
Eural has enjoyed constant growth. The first mill
in Rovato covered a total area of 15,000 square
metres, now this aluminium production giant
covers an area of 400,000 square metres, with
70,000 of these under cover.
Bars and finished parts in Eural 6026 alloy.
The two centres, in Rovato and Pontevico, work
in daily collaboration with each other.
The workforce has also increased, despite
technological growth and improvements in
production methods created by latest
generation of automated machinery.
There are currently two product families - the
rods & bars, which are the company’s core
business, and aluminium profiles for high-tech
industrial applications.
The company is particularly proud that it has
obtained international certification for rods and
bars in 6026, an alloy developed and tested
over a number of years in the EURAL
laboratories. It has now become one of the most
sought after products of its kind in world
markets.
Obsessive attention to the product, which is
repeatedly tested and checked during the
production cycle, combines with absolute
quality ensured by the use of the best raw
materials to complete this Italian success story,
which is also based on a strong sense of
environmental responsibility.
The production cycle is organised to minimise
waste levels, and to ensure that recycling is a
very high priority. The use of filters and the
installation of solar panels are evidence of this
intense commitment in the fight against
pollution.
One dream is still to be fulfilled: to promote and
expand the culture and knowledge of
aluminium, an atoxic material that can be used
in a large number of applications to replace
other, now obsolete, alloys that are far more
expensive and cause significantly more
pollution.
Eural Gnutti SpA
Via S. Andrea, 3 - 25038 Rovato (BS)
Tel +39 030 7725011 - Fax +39 030 7702847
info@eural.com - www.eural.com