Stationary Source Control Techniques Document for Fine Particulate ...

TABLES (continued)
Table 5.4-2 Current Industrial Applications of Wet Scrubbers
(References 1, 2, and 8) .........................................5.4-22
Table 5.4-3 PM 10/PM 2.5 Control Potential for Various Scrubber Designs ..............5.4-23
Table 5.4-4 Capital Cost Factors for a Typical Scrubber (Reference 9). ..............5.4-25
Table 5.4-5 Recommended Gas Velocities, Liquid/Gas Ratios, and
Pressure Drops for Particulate Wet Scrubbers (Reference 10). ............5.4-26
Table 5.4-6 Annual Cost Parameters for Particulate Scrubbers
(Reference 11). ...............................................5.4-32
Table 5.4-7 Annual Cost Factors for Particulate Scrubbers (Reference 11). ............5.4-33
Table 5.5-1 PM Control Efficiencies for Thermal Incinerators in
Phthalic Anhydride Manufacturing Processes (Reference 10) ...............5.5-9
Table 5.5-2 Operational Requirements for Satisfactory Incinerator
Performance for Various Industrial Applications and
Control Levels (Reference 3) .....................................5.5-11
Table 5.5-3 Capital Cost Factors for Thermal Incinerators (Reference 11) .............5.5-13
Table 5.5-4 Incinerator Annual Cost Parameters (Reference 11) ....................5.5-16
Table 5.5-5 Annual Cost Factors for Incinerators (Reference 12). ...................5.5-17
Table 6.1 Estimated Control Efficiencies for Drop Height
Reduction Techniques (Reference 7) .................................. 6-6
Table 6-2 Parameters for Hood Cost Equation (Reference 8) ....................... 6-9
Table 7-1 Summary of Emerging PM Control Technologies ........................ 7-2
x