B U L L S E Y E G L A S S - Have Glas

BUllsEYE lINE
Toll-free order line 888.220.3002 • Order online at www.bullseyeglass.com Tools & Supplies
40
Bullseye Line
Products we use daily in both our factory
and Research & Education Studios.
BUllsEYE GlasTaC
Lightly tacks glass pieces in place prior to firing.
Slow drying and pliability allow readjustments as
you work. Organic colorant lets you see where you’ve
put it on clear glass but it burns out in the kiln. Use
sparingly. Water soluble.
4 fl oz (.12 L) 8234 $6.00
32 fl oz (.95 L) 8232 $27.65
BUllsEYE sHElF PRIMER
Bullseye’s popular pink formula. Each batch is kilntested
to ensure consistency from run to run. Illustrated
instructions discuss application, drying, mixing,
precautions and storage. One 5 lb bucket will coat
about a hundred and fifty 20” sq (129 cm2 ) shelves.
5 lbs (2.27 kg) 8220 $30.65
40 lbs (18.14 kg) 8222 $177.00
BUllsEYE THINFIRE sHElF PaPER
For the smoothest finish on the bottom of your kiln-fired projects. Quicker and easier to use
than primer. Bullseye logo printed on the bottom side. Instructions included. Each sheet good
for one use only.
1 sheet, 20.5 x 20.5 in (520 x 520 mm) { 7089 $4.35
100 sheets, 20.5 x 20.5 in (52 x 52 cm) 8210 $334.10
Roll, 250 ft x 41 in (76.2 x 1.04 m) 8211 $881.65
BUllsEYE VERMICUlITE BOX
Precut, reusable vermiculite boards
for building a casting box that can be
used to create a cast glass piece that
is 7.625” x 7.625” x 1.375” (194 x 194 x 35
mm). Fiber paper sold separately.
{ 8241 $37.40
BUllsEYE VERMICUlITE BOaRD
A high-density vermiculite board that can withstand temperatures up to 2012°F
(1100°C). This board is stronger than most fiberboard and can be cut and tooled just
like wood. however, it is not recommended for use as kilnshelf. While it is certified
asbestos-free, please use a nIOSh-approved respirator when cutting or creating
dust. Prefire to 1580°F (860°C) for a half hour before initial use. Est. weight: 19 lbs
(8.6 kg). 1 x 24 x 36 in (25 x 610 x 914 mm).
{ 8240 $35.35
BUllsEYE HYDROGEl N
A flexible mold compound used to make mother molds for
casting multiple copies. When mixed to a creamy consistency
with water, hydrogel n sets in approximately five minutes
to a rubbery gel that yields an excellent mold impression.
hydrogel n molds can be kept for a few days in a sealed, airtight
container. Because of its ability to set quickly, this is a great
product to use for demonstrations and workshops.
1.5 lbs (.68 kg) { 8242 $32.45
5 gals (18.93 L) { 8243 $131.45
BUllsEYE INVEsTMENT (PlasTER-sIlICa)
A simple mixture of pottery plaster and silica flour which
releases easily from Bullseye glass.
5 lbs (2.27 kg) { 8244 $13.55
40 lbs (18.14 kg) { 8245 $80.36
➥ Bullseye Casting Refill Supplies are
best used to create open-face castings with
the assembled mold techniques described
in “TipSheet 5: Bullseye Box Casting” at
www.bullseyeglass.com/education
kIlN BRIX & HOT DaMZ
Mullite clay Damz and hard Brix bracers make containing thicker
fused slabs a breeze. Three sizes of Brix and three sizes of Damz.
Combine and conquer. Tolerance on Brix dimensions is 1/8” (3.18 mm).
HOT DaMZ
6 x 2 x .5 in (152 x 50.8 x 12.7 mm) 8890 $8.75
8 x 2 x .5 in (203 x 50.8 x 12.7 mm) 8891 $10.80
10 x 2 x .5 in (254 x 50.8 x 12.7 mm) 8892 $13.75
kIlN BRIX
9 x 2.25 x 2.5 in (229 x 57.2 x 63.5 mm) 8896 $15.90
4.5 x 2.25 x 2.5 in (114 x 57.2 x 63.5 mm) 8897 $9.75
4.5 x 1.125 x 2.5 in (114 x 28.6 x 63.5 mm) 8898 $6.70
➥ To learn how to create multi-layered
imagery in thick kilnformed blocks,
download “TipSheet 3: Working Deep” at
www.bullseyeglass.com/education