KOB Pyrot Installation & Operation

a) Fire-extinguishing System for Burner Slide-in Module, Art. No. K-SLE
Note: Pyromat-DYN has an extra charge with Art. No. K-SLE (see Spec Sheet 4500)
With Pyrot and Pyrtec this is included in the burner article.
Fig. 1: K-SLE on feed auger
Spec Sheet
Fire- extinguishing Systems
K-SLE & K-SLV Installation
b) Fire-extinguishing System for Material Feed Facility, Art. No. K-SLV
For Köb scope of delivery, refer to Spec Sheet 4500
vIESmAnn
4550-1
Fig. 2: K-SLV on conveyor auger Fig. 3: K-SLV on extractor system situated on top with
Down pipe
Be sure to note:
· The lines must be executed in metal (1/2") with fixed pipe work (K-SLE and K-SLV).
· It must not be possible to shut off the cold water inlet without the aid of tools.
· Be especially sure to comply with Point 5 of the Installation Instructions (Fire Prevention).
Note:
K-SLV is an alternative or supplementary safety device. As standard, either a slide valve (Art. No. MBA-.; included in
Article ADF_.,. / ADE_3,0) is required for pressure less material storage sites or a rotary valve (Art. No. MBZ-.) for
material storage sites with over- or under-pressure (loading with fan, such as wood-processing businesses).