DELIVERY PROGRAM HEAVY PLATE - Dillinger Hütte GTS

XXX STEEL GR ADES AND
DIMENSION R ANGES
The following overviews of ”Grades“ and ”Dimensions“ tell you the standard grades and
the standard dimensions and formats which can be ordered from Dillinger Hütte GTS.
Other grades in other formats and dimensions are available in most cases – just
contact us!
The list of grades firstly groups the steels by applications, such as ”Steels for pressurevessel
engineering“. The relevant standards and the corresponding grade designations
can be found in alphabetical order within the section for the particular application.
Maximum plate thickness is stated as defined by the applicable standard or by technical
capabilities at Dillinger Hütte GTS for every grade. A reference to the applicable dimension
table can also be found here.
Please note: plate dimensions larger than those stated in the tables can be agreed
in most cases, as the list of grades generally states only the plate thicknesses specified
in the relevant standards for the particular grade.
Just contact us if you need more details!
Please also note that the available dimensions of steels subject to approval by an acceptance
organisation or supervisory authority may change with time.
The interactive facility on our www.dillinger.de/e-service/ platform states the up-todate
data in all cases.
The following conditions of order apply in all cases for heavy plate:
■ Plate widths of above 5,100 mm can be supplied only in non-levelled state
■ Please order an even number of plates in the case of widths of up to 1,500 mm,
since these plates are double-width rolled
■ Plates can be supplied only in lengths of 2 m or above
■ Minimum item weight is 4.5 t
■ Facilities for transportation (road, rail, water) must in all cases be verified prior to
orders for plates of above 18 m in length and above 4,200 mm in width.
27