DELIVERY PROGRAM HEAVY PLATE - Dillinger Hütte GTS

Steels for pressure vessel construction
Standard Steel grades
EN 10028-4:
Ni-alloyed low-temperature
steels
EN 10028-5:
fine-grained steels,
thermomechanically rolled
Thermomechanically rolled
fine-grained steels for special
applications acc. to DH GTS
Specification
EN 10028-6:
fine-grained steels, quenched
and tempered
Fine-grained steels, quenched
and tempered for special applications
acc. to Dillinger Hütte GTS
Specification
ASTM A ... / ASME SA ... :
steel grades for pressure
vessel construction
(list following standard-no.)
XXXXXX Grades under current standards
11 MnNi 5-3 80 1
13 MnNi 6-3 80 1
15 NiMn 6 A 1
12 Ni 14 65 1
12 Ni 14 > 65 80 4
X 12 Ni 5 50 1
X 8 Ni 9 +NT640 A 1
X 8 Ni 9 +QT640, +QT680 A 4
X 7 Ni 9 A 4
P 355 M, ML1, ML2 8 63 2
P 420 M, ML1, ML2 8 63 2
P 460 M, ML1, ML2 8 63 2
P 420 M HT L2, K4 8 100 2
P 355 Q, QH, QL1, QL2 6 150 4
P 460 Q, QH, QL1, QL2 6 150 4
P 500 Q, QH, QL1 6 150 4
P 500 QL2 A 4
P 690 Q, QH, QL1,QL2 6 150 4
DIROS 500 HT, S A 4
DILLIMAX 690 PE 10 150 4
A / SA 203 [M] Gr D, E 50 1
A / SA 203 [M] Gr F 75 4
A / SA 204 [M] Gr A 26 130 1
A / SA 204 [M] Gr B 80 1
A / SA 204 [M] Gr C 25 1
A / SA 285 [M] Gr A, B, C 50 1
A / SA 299 [M] Gr A 205 1
A / SA 299 [M] Gr B A 1
A / SA 302 [M] Gr A, B, C, D 6 A 1
A / SA 353 [M] A 4
A Please ask for max. plate thickness available case by case
B The available plate dimensions for steels according to this Dillinger Hütte GTS Material Data Sheet
or specification are advised upon special request
35
Min. plate
thickness
Max. plate
thickness
Dimension
table