UV- TECHNOLOGY Technical Documentation ELC PE22 / PE32
UV- TECHNOLOGY Technical Documentation ELC PE22 / PE32
UV- TECHNOLOGY Technical Documentation ELC PE22 / PE32
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 Installation page 16<br />
3.5.1 Setting up the PROFIBUS address<br />
Fig. 11: LED status (red left, green right) and rotary coding switch for low and high nibble<br />
The PROFIBUS address must be set using the rotary coding switches.<br />
The address space extends from 01hex to 7Dhex (corresponding to 1 to 125), whereby low and<br />
high nibble are allocated according to Fig. 11. Each address may be used only once per<br />
installation.<br />
The address is adopted when current is applied to the <strong>ELC</strong> (paragraph 4.2). If the appliance<br />
is already under power supply, it must first be disconnected.<br />
<strong>ELC</strong> <strong>PE22</strong>_<strong>PE32</strong>-V2.2-09.11-GB Subject to technical alterations
Change language