Conductix-Wampfler Cables for Reeling Systems

Conductix-Wampfler Cable WG / WG-D
Technical data
Electrical
parameters
Thermal
parameters
Mechanical
parameters
Chemical
parameters
Materials
Design
features
rated voltage Uo/U 3.6 / 6.0 kV 6.0 / 10.0 kV 8.7 / 15.0 kV 12.0 / 20.0 kV
maximum permitted AC operating voltage Uo/U 4.2 / 7.2 kV 7.0 / 12.0 kV 10.2 / 18.0 kV 14.0 / 24.0 kV
maximum permitted DC operating voltage Uo/U 5.4 / 10.8 kV 9.0 / 18.0 kV 13.0 / 26.0 kV 18.0 / 36.0 kV
ampacity according to table data, otherwise according to DIN VDE 0298 part 4
AC test voltage according to DIN VDE 0250 part 813
ambient temperature
flexing-25°C to + 80°C
fixed -40°C to + 80°C
maximum permitted operating temperature of the conductor 90°C
short-circuit temperature of the conductor 250°C
12 x Ø on the reel
minimum bending radii allowing for free movement
15 x Ø at a track curve
20 x Ø at an S-track curve
torsional stress ± 100 °/m
tensile load-bearing capacity 20 N/mm2 conductor cross section during operation for flexing cables
LBS-free / silicone-free yes
combustion behaviour
flame retardant and self-extinguishing
according to DIN VDE 0482 part 265-2-1, IEC 60332-1
resistant to ozone yes
UV-resistant yes
oil-resistant yes
resistant to humidity yes
Inner conducting layer consists of a semiconducting rubber, compound (according
insulation
to DIN VDE 0207 part 20), outer conducting layer of conducting rubber, to be able
to be stripped cold (simple stripping method)
Inner sheath consisting of a special red EPR compound, 5GM3,
with polyester reinforced braid for protection against torsional forces. Braid is
sheathing system
vulcanized between the inner and outer sheaths
in a sandwich structure. Outer sheath of abrasion-resistant PCP based compound
offering excellent resilience, 5GM5
conductor
electrolytic copper, flexible conductor
category 5, according to DIN VDE 0295
conductors in layers stranded with small lay, earth conductor divided into three
stranding
parts in the interstices (without optic fibers) or two halfes in the interstices (with
optic fibers)
conductor coding black insulation with white numbers
Standards acording to DIN VDE 0250 part 813
Design
codes
Fiber optic
R-(N)TSCGEWOEU
R-(N)TSCGEWOEU-FO
fiber type (core-Ø / fiber-Ø)
damping at 850 nm
at 1300 nm
at 1550 nm
numeric aperture
dispersion at 1300 nm
at 1550 nm
band width at 850 nm
at 1300 nm
R- cable suitable for use on reels
(N) adapted to a standard
TS heavy duty cable
CGE conducting non-metallic covering surrounding the insulation
of the outer conductors
W resistant to atmospheric corrosion
OE oil-resistant outer sheath
U outer sheath of low flammability
according to DIN VDE 0472 part 804 (fire-proof)
FO with fiber optic
Mono-Mode
Multi-Mode
Multi-Mode
E9/125
-
0.4 dB/km
0.3 dB/km
-
3.5 ps/nm km
18.0 ps/nm km
400 MHz km
60 - 1.500 MHz km
Conductix-Wampfler Cables for Basic Reeling
50/125
2.8 dB/km
0.8 dB/km
-
0.20 ± 0.02
-
-
400 MHz km
60 - 1.500 MHz km
62.5/125
3.3 dB/km
0.9 db/km
-
0.27 ± 0.02
-
-
200 MHz km
600 MHz km
23