Instruction Manual and Maintenance Tips for your dwt ... - dwt-Zelte

More documents

Recommendations

Info

050139_dwt_Au bau_GB 10.10.2005 08:50 Uhr Seite 4 Complete Awnings and Sun Canopies Determine the awning size � Measure, through the caravan edge piping profile, from point A to point B – this is the awning size; A and B are the awning tensioning points. Fixing the wall eyelets to the caravan � BStarting at the front of the vehicle, pull the awning roof in the piping profile until both sides of the roof have the same distance from the ground (measured vertically down). Approx. 10 cm above the horizontal zip in the side walls left and right, are the points C and D for fixing the wall eyelets to the caravan. Now pull the awning roof out of the profile and fix the wall eyelets to the caravan. Now determine the middle position between C and D (=E). Fix the middle eyelet (F) horizontally approx. 2 cm underneath the piping profile Partial Awnings Determine the awning position � Measure, through the caravan edge piping profile, from point A until the point on the vehicle � where the awning ends (B). Here is the position of the vertical wall. Fix the wall eyelets for a partial awning positioned in the middle. � Starting at the front of the vehicle, pull the awning roof in the piping profile. The wall eyelets (C and D) are fixed approx. 2 cm underneath the piping profile on the side wall, at the rear of the pole pocket openings. Now pull the roof out, measure the exact middle between C and D and fix the middle eyelet, also 2 cm underneath the piping profile (point F) � � � � � A B h C F C/D = E 2 D h A B h h B C F D A
050139_dwt_Au bau_GB 10.10.2005 08:50 Uhr Seite 5 Left or right partial awnings � Pull the awning roof in the piping profile and start at the rear with a left partial awning at the front with a right partial awning The wall eyelet fixing point for a partial awning is on the awning side (C), 10 cm above the side roof seam. The vertical wall has a pole pocket. Here you can fix a wall eyelet at position (D) on the caravan, 2 cm underneath the piping profile. � Now measure from eyelet C on the awning side, horizontal as described, to the wall eyelet D. fix the middle eyelet exactly in the middle between these points, 2 cm underneath the piping profile F. from the left for a left partial awning from the right for a right partial awning. Our Tip: � Seal the drilled holes to keep moisture out. Your specialist supplier will be glad to advice you! � A very practical alternative to wall eyelets are the vario-clip elements, that you can easily click on to the second roof profile and save you a lot of assembly work. The vario-clip elements are 100% stable and reusable. Ask your specialist supplier! � � � C C F D F D D C MEIN ZELT ! 4–5 GB
Page 1 and 2: 050139_dwt_Au bau_GB 10.10.2005 08:
Page 3: 050139_dwt_Au bau_GB 10.10.2005 08:

Instruction Manual and Maintenance Tips for your dwt ... - dwt-Zelte

Create successful ePaper yourself

Delete template?

Save as template?