Instruction Manual and Maintenance Tips for your dwt ... - dwt-Zelte

More documents

Recommendations

Info

050139_dwt_Au bau_GB 10.10.2005 08:50 Uhr Seite 8 Free Standing Caravan Awnings, Motorcaravan-, Bus- and Frame Tents Prepare everything � Check that the poles set is complete and according to the plan. Fix the screws and the pole clamps to the poles. Lay out the poles and corner pieces according to the plan on the ground and assembly the roof ring (corner, ridge- and gable poles). Roof front supports are not to be assembled yet. � Now put the upper vertical poles in the corner poles to make the further assembly easier. The lower vertical poles are fitted when the tent lies over the pole frame. Screws must always be directed downwards or inward. Now the erecting starts � If you have an awning with removable side walls, the walls should be taken out first. � Put the awning roof over the pole frame. Be careful with the corners and parts that stick out; they may damage the awning material and the windows! With frame tents the sun pelmet is assembled last. � Tents with a sun pelmet have pelmet supports that fit in the corner pieces. Tension the pelmet so that the gable seam is in front of the gable poles – not on the gable poles! � Now put the walls in and close all the zips. If there are telescopic poles you can now tension the roof. � Now fit the lower vertical poles in the upper vertical poles. If the poles are telescopic, you can adjust them to the desired height. With frame tents you fit the lower poles in the upper poles. � � � �
050139_dwt_Au bau_GB 10.10.2005 08:50 Uhr Seite 9 The last part is the ground tensioning � Hook all the tensioning elements that are not sewn in to the ground skirt. Adjust the poles so that the vertical seams are over the vertical poles. Tent corners and zip ends are to be tensioned by using the pegs and the other fixing points with ground nails. You can tension the walls by pulling the corner poles outward and securing the corners to the ground. Then tension the vertical zips crossways to the ground to relieve them. Then secure the other fixing elements to the ground. � With frame tents the sun pelmet can now be assembled and the inner cabins (depending on the parts delivered) can be hung inside. Our tip: � Check the tension on a regular basis, for material flexibility, temperature changes and other influences can lead to less tension. � Fixing materials for ground skirts are not standard; though some types of ground need special pegs, ground nails and lines. Ask your specialist supplier. MEIN ZELT ! 8–9 GB
Page 1 and 2: 050139_dwt_Au bau_GB 10.10.2005 08:
Page 7: 050139_dwt_Au bau_GB 10.10.2005 08:

Instruction Manual and Maintenance Tips for your dwt ... - dwt-Zelte

Create successful ePaper yourself

Delete template?

Save as template?