IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics

More documents

Recommendations

Info

DN800-SATA/-L Motherboard IWILL J57: Front Audio Jumper This header lets you enable or disable the function of the front audio connector. J57 W/O FRONT WITH FRONT AUDIO AUDIO CONNECTOR CONNECTOR 5-6 SHORT OPEN 9-10 SHORT OPEN 18 IWILL DN800-SATA/-L Series
IWILL Components and Jumper Setting Rear Panel I/O Ports This is an illustration of the Mainboard rear I/O port array PS/2 Mouse Connector (6-pin Female) The system will direct IRQ12 to the PS/2 mouse if one is detected. If no mouse is detected, IRQ12 will be free for expansion cards to use. PS/2 Keyboard Connector (6-pin Female) This connection is for standard keyboards using a PS/2 (mini DIN) plug. This connector will not accept standard AT size (large DIN) keyboard plugs. You may need a DIN to mini DIN adapter for standard AT keyboards. Parallel Printer Connector (25-pin Female) You can enable the parallel port and choose an IRQ through the BIOS. You can choose between ECP and EPP support through the BIOS setup. Serial Port (COM1) Connector (9-pin Male) The COM1 serial port can be used for pointing devices or other serial devices. Universal Serial Bus Ports (4-pin Female) Four onboard external USB 2.0 ports are available for connecting USB devices. Refer to USB 2.0 Ports & Header for more information. IWILL DN800-SATA/-L Series 19
Page 1 and 2: IWILL DN800-SATA/DN800-L Motherboar
Page 3 and 4: IWILL User’s Manual Disclaimer Th
Page 5 and 6: IWILL User’s Manual CHAPTER 4 BIO
Page 7 and 8: IWILL User’s Manual 1. DN800-SATA
Page 9 and 10: IWILL Overview � When handling ch
Page 11 and 12: IWILL Overview DN800-SATA/DN800-L S
Page 13 and 14: IWILL Components and Jumper Setting
Page 17: IWILL Components and Jumper Setting
Page 33 and 34: IWILL Hardware installation Motherb
Page 35 and 36: IWILL Hardware installation Step 3-
Page 37 and 38: IWILL Hardware installation Step 7-
Page 40 and 41: DN800-SATA/-L Motherboard IWILL Hea
Page 43 and 44: IWILL Hardware installation Install
Page 45 and 46: IWILL Hardware installation Powerin
Page 47 and 48: IWILL BIOS Setup BIOS Setup This ch
Page 49 and 50: IWILL BIOS Setup Using the BIOS Set
Page 51 and 52: IWILL BIOS Setup Main Menu This is
Page 53 and 54: IWILL BIOS Setup Boot Menu Feature
Page 55: IWILL BIOS Setup Wait for “F1”
Page 59 and 60: IWILL OS and Drivers Installation D

IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?