IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics

DN800-SATA/-L Motherboard IWILL
Step 5-- Raise the retaining lever of the processor locking mechanism to a
perpendicular position.
Raise the retaining lever Raise the socket lever to
the vertical position
Step 6--Align the processor to the socket by matching the Pin 1 corner of the socket
(marked with a triangle) to the Pin 1 corner on the Socket 604 (marked by a
triangular hole in the Pin 1 corner).
Align the Pin 1 corners
36 IWILL DN800-SATA/-L Series