IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics
IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics
IWILL DN800-SATA/DN800-L Motherboard User's ... - Flextronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>DN800</strong>-<strong>SATA</strong>/-L <strong>Motherboard</strong> <strong>IWILL</strong><br />
Installing the CPU and Heatsink Procedures<br />
<strong>IWILL</strong> <strong>DN800</strong>-<strong>SATA</strong>/-L support Intel Xeon @FSB800 MHz processor. We only<br />
recommend using the Intel Original heatsink kit. CEK (Common Enabling Kit) is<br />
specially designed for the Intel latest Xeon. For installing CEK, please follow direction as<br />
below.<br />
Step 1 -- Before you install the heatsink, please check whether the attached Hat<br />
Springs fasten well to the back of this motherboard or not.<br />
Step 2-- Position the attached silver standoffs for the special-designed iron plate.<br />
34 <strong>IWILL</strong> <strong>DN800</strong>-<strong>SATA</strong>/-L Series