Özgeçmiş ve Yayınlar listesini indirmek için tıklayınız - Sakarya ...

Adjustment”, Energy Conversion and Management-Elsevier, Vol. 47, pp. 1298-1310
(2006).
7. Engin, T., Gur, M., Scholz, R., “Effects Of Tip Clearance And Impeller Geometry On The
Performance Of Semi-Open Ceramic Centrifugal Fan Impellers At Elevated
Temperatures”, Experimental Thermal Fluids Science, Vol. 30, pp. 565-577 (2006)
8. Engin, T, Umit, Evrensel, C., Heavin, S., and Gordaninejad, F., “Effects of Surface
Roughness on Flow Characteristics of Laminar Bingham Plastics Flow in Microtubes”,
ASME Journal of Fluids Engineering, Vol. 26, pp. 880-883, September 2004.
9. Engin, T., Ari, V., “Energy Auditing and Heat Recovery for Dry Type Cement Rotary Kiln
Systems: A Case Study”, Energy Conversion and Management, Vol. 46, pp. 551-562,
2005.
10. Engin, T., Evrensel, C., and Gordaninejad, F., “Numerical Simulation of Laminar Flow of
Water-Based Magneto-Rheological Fluids in Microtubes with Wall Roughness Effect,”
International Communications in Heat and Mass Transfer, Vol. 32, pp. 1016-1025, 2005.
11. Tekelioğlu, M., Engin, T., and Soyhan, H., “Study of Nitric Acid Formation in Direct
Contact Heat Exchangers used for Desalination Processes,” Energy&Fuels, Vol. 19, pp.
285-291, 2005.
12. Engin, T., Gur, M., “Comparative Evaluation of Some Existing Correlations to Predict
Head Degradation of Centrifugal Slurry Pumps,” ASME Journal of Fluids Engineering, Vol.
125, pp. 149-157, January 2003.
13. Engin, T., Kurt, A., “Prediction of Centrifugal Slurry Pump Head Reduction: An Artificial
Neural Networks Approach,” ASME Journal of Fluids Engineering, Vol. 125, pp. 199-202,
January 2003.
14. Engin, T., Gur, M., “Performance Characteristics of an Unshrouded Centrifugal Pump
Impeller with Running Tip Clearance Pumping Solid-Liquid Mixtures,” ASME Journal of
Fluids Engineering, Vol. 123, 532--538, September 2001.
National Journal Papers
1. Engin, T., “Merkezkaç Pompaların Katı-Sıvı Karışımlarının İletimindeki Performans
Kaybının Belirlenmesi”, Tesisat Dergisi, Sayı 110, s. 122-132, Şubat 2005.
2. Şahin, İ., Öz, H. R., Engin, T., İlhan, A., ve Akpolat, A., “Manyetik Sıvılı Damperlerin
Yapısal Analizi”, Mühendis ve Makina, Cilt 46, Sayı 551, s. 41-49, 2005.
3. Engin, T., Topuz, A., Elieyioğlu, K., “Optimum Design of Segmentally Baffled Shell-and-
Tube Type Liquid to Liquid Heat Exchangers Used in Central Heating Systems,” Journal
of Thermal Sciences and Technology, No. 3-4, 27-31, November 1998 (in Turkish).
4. Engin, T., Güngör, K. E., “Shell-and-Tube Heat Exchangers Optimization According to
Design and Cost Parameters,” Turkish Journal of Engineering & Environmental
Sciences, Vol. 20, No. 6, 313-322, 1996 (in Turkish).
4