COMPOUND BOW OWNER'S MANUAL - Bear Archery

BOW ADJUSTMENTS
Draw Length Adjustment - Modular Style (continued)
3) Repeat steps 1 and 2 on other end for dual
eccentric bows. Be sure to use matching elements.
Draw Length Adjustment - Tri-draw style
Some Escalade Sports bows have tri-draw style
wheels. These can be adjusted to one inch longer or one
inch shorter than the factory set draw length.
Note: This draw length adjustment will affect the
peak weight of the bow.
1) Back limb bolts off at least 2 turns.
2) Using a double pull bow press, relax the bow.
3) To increase the draw length by one inch, move
the cable to the inboard slot (toward the center of
the bow). Repeat on opposite end.
4) To reduce the draw length, move the cable to the
outboard slot (toward the limb tip). Repeat on
other end.
5) Be sure the cable and string are firmly seated in
the proper grooves as you release the bow press.
14