Design-in Guide for Xtreme drivers low wattage - Philips Lighting

More documents

Recommendations

Info

•From the COM port list choose the port with the highest number* *Sometimes this is not the correct COM. To discover the correct one, see the last page of this appendix. 3.2.1Programming the DynaDimmer functionality 1. 2. 3. 4. 5. 6. 34
1. 3.2.2 Programming the Line Switch functionality 3.2.3 Changing lamp type 2. 3. 35
Page 1 and 2: Design-In Guide Electronic (start)X
Page 3 and 4: End-of-life causes ................
Page 5 and 6: 1.3 Available Xtreme and startXtrem
Page 7 and 8: Figure 2. All four screws are requi
Page 9 and 10: 2.3 Mains behaviour The absolute ma
Page 11 and 12: 3.1 Factors affecting lifetime The
Page 13 and 14: 6 For optimal EMI behaviour the lar
Page 15 and 16: Metal pole Concrete pole Wooden pol
Page 17 and 18: 5 Class I and Class II applications
Page 19 and 20: Over time the lamp voltage will inc
Page 21 and 22: Insulation: basic insulation IEC 61
Page 23 and 24: Power consumption with nominal lamp
Page 25 and 26: Warnings DO NOT CONNECT THE OUTPUT
Page 27 and 28: Appendix 1. How to use DynaVision X
Page 29 and 30: The dim level and fade time are var
Page 31 and 32: The length (and distance between th
Page 33: Starting the PC Tool After installa
Page 37: Appendix 4 Overview of dimming HID

Design-in Guide for Xtreme drivers low wattage - Philips Lighting

Create successful ePaper yourself

Delete template?

Save as template?