Product catalogue

IRC RADIANT PANELS – FENIX has manufactured and supplied IRC panels for foreign producers of infrared cabins (Austria, Germany)
since 2004. Now it is offering these panels on the Czech market together with a control unit – IRT regulator – and this also as a DIY kit.
IP 44 PRODUCT Output [W] Voltage [V] Weight [kg] Dimensions [mm] Cat. No.
IRC Panel 1130x360/200 200
875x360 5401805
IRC Panel 1130x360/260 260 5,9 1130×360 5401810
IRC Panel 1330x360/310 310 1330x360 5401811
IRC Panel 650x780/330 330 230
650x780 5401813
IRC Panel 1130x780/575 575 11,5 1130×780 5401812
IRC Panel 1130x780/575 S (with a probe) 575 11,5 1130×780 5401814
IRC Panel 1330x780/680 S (with a probe) 680 1330×780 5401815
CONTROL UNIT – IRT 01 REGULATOR – The IRT regulator maintains a set temperature on the surface of radiant panels, as well as the
required operating time of the heating and lighting of the infrared cabin. It contains a power unit (installed within a cavity under the bench) to
which IRC panels are connected using plugs, and also a control unit, light and supply cable. Up to 6 IRC panels can be connected. All IRC
panels are equipped with a special connector and the offered sizes can be combined as needed; however, the total wattage mustn’t exceed
3.4 kW and one (only one) of the panels used must have an integrated temperature sensor. The power unit is connected to a 230 V socket,
protected with a 30 mA residual current device.
IP 44 DESCRIPTION Cat. No.
IRT 01 REGULATOR
Temperature setting 20–80 °C;
time setting 1 to 99 minutes; switch
Set contents: control unit including a connection cable; power unit with connectors;
3 m power cable with plug (230 V / 16 A); 3 m connection cable for lighting (light is
not included in the set); instructions; screws – 8 pcs.
Set selection
According to the size of the infrared cabin you wish to install, choose and combine the offered
panel sizes in such a way that they best cover the space within the infra-red cabin – the lower
and upper halves of the body. It is ideal if the panels surround the user on at least three sides.
There can be a maximum of six panels for every control unit, from which one (but
only one) must be equipped with an integrated temperature probe. The maximum
wattage of all the panels attached to one control unit can be up to 3.4 kW.
An IRT-01 regulator is necessary to control the panels. The regulator comes with
the set, which includes a control panel and power unit. The control panel should
be installed inside the infrared cabin within reach of the user. The power unit is
installed in a cavity under the bench and should not be easy to access.
The connecting leads for the IRC panels are, after installation on the wall, connected
to the power unit with the aid of connectors – the connectors from the panels, lighting,
control units and connecting leads have different dimensions, so it isn’t possible
to confuse them and connection can be carried out by a non-expert user.
If lighting is required it is also possible to connect a light to the power
unit; a connection cable comes as part of the set.
It is necessary to equip panels with a suitable protective cover, allowing the correct
operation of the panel. We recommend using the wooden covering frames that are
offered, as they are constructed size-wise to exactly fi t the dimensions of the IRC panels
Wooden frames not only fulfi l a protective function, but also attach panels to walls
– the panels alone are not fi tted with any mounting apertures or brackets.
11
4200040