Product catalogue

More documents

Recommendations

Info

SPECIAL APPLICATIONS CONCRETE CURING CABLE CIRCUITS A twin conductor screened cable with a 1×2 m cold lead with plug connection. 230 V. OUTPUT [W] Type PDS1P 40 W/m LENGTH [m] Cat. No. 130 40130 3,3 2325000 380 40380 10,0 2325005 760 40760 19,0 2325010 1400 401400 35,0 2325018 1500 401500 38,0 2325020 3300 403300 82,0 2325030 PDS1P cable for curing concrete. Packing in PE foil. SELF-REGULATING CABLES The ELSR self-regulating cables are parallel electrical heating strips consisting of a specially fi nished plastic with embedded carbon particles that create an electrical path between two parallel copper bus bars. Marking Output W/m 10°C Temperature tolerance [°C] Limitation for instalation Min. temp. Min. radius Max. length at the temperature setting Cat. No. ELSR-M – Frost protection of pipe 6 A 10 A 16 A ELSR-M – 10 BO 10 65 –30°C 35 mm 65 m 95 m 105 m 2330310 ELSR-M – 15 BO 15 65 –30°C 35 mm 37 m 58 m 65 m 2330315 ELSR-N – Frost protection of trays, gutters, roofs, technological heating 16 A 20 A 25 A ELSR-N – 20 BO 20 80 –10°C 20 mm 94 m 116 m 146 m 2330320 ELSR-N – 30 BO 30 80 –10°C 20 mm 70 m 87 m 109 m 2330330 KIT Nr. 4 For connection and termination of self-limiting cables 5030124 Cold lead for self-regulating cables SK 1,5 Limitation: 12 A / 20 m 2000790 SK 2,5 Limitation: 20 A / 20 m 2000795 Industrial applications: Analyzer lines – prevent condensation Cooling water lines – anti-freeze protection Potable water lines – anti-freeze protection Caustic soda – prevent crystallization under 30 °C 24 Oils and fats – maintain pumpable viscosity Heating oil – prevent wax dispersion Vessel – anti-freeze and condensation protection PC / PC-S CABLES WITH CONSTANT LINEAR WATTAGE; PCC CIRCUITS Cables with constant linear wattage provide a constant wattage per standard metre which enables their shortening and fi nal alterations at the place of installation. They are suitable for applications where higher outputs and thermal resistance are required – the heating of insulation in freezers, pipe heating, process heating, heating of compressor drainage pipes, etc. The cable consists of two independently insulated supply conductors around which a very thin heating (resistance) wire is wound. It is connected to the supply conductors every 1 m of length – alternately to the phase and to the working conductor. In this way, ‘heating zones’ with a length of 1 m are created. To simplify – these are one-metre long resistance cables connected one after another in a coil. The whole structure is fi tted with a PC-S type silicon jacket, and also with a braided protective screen – termed armouring. The cable can be shortened to the required length; the wattage per 1 m remains the same, however. WARNING: the beginning and end of the cable will not give out heat; heating occurs from the following (preceding) heating zone! In an extreme Protective braiding Marking Output Operating Temperature Length of Min. order Max. length Cat. No. (armouring) [W/m] temperatures resistance heating zone length of circuit situation, if the cable is shortened immediately after PC 25 – the connection of the resistance wire to the conduc- 25 −50…60 °C 180 °C tor, this non-heating part can be up to 1 m long – we therefore recommend that a minimum of 1 m of extra cable is ordered. 1) 2330210 1 m 2 m 80 m PC-S 25 CuSn (1 mm²) 2330212 PC 50 – 50 −50…60 °C 180 °C 1) 2330214 1 m 2 m 70 m PC-S 50 CuSn (1 mm²) 2330216 Operating voltage 230 V / 50 Hz, dielectric strength 1 500 V, cross sectional area of the conductors 2×0.75 mm² (for 25 W/m) and 2×1.5 mm² (for 50 W/m), heating (resistance) conductor Ni/Cr (80/20). PCC circuits are made from braided (armoured) cable with a constant linear wattage of 30 W/m – in principle, it is the same kind of cable as the PC-S type, but this is not sold per metre but only as fi nished circuits of set lengths, fi tted with a connecting lead (termed a cold lead) with a length of 1.5 m. Thanks to the silicon jacket and the thermal resistance, they are ideal for the protection of insulation for refrigeration equipment and freezers. 1) Thermal resistance of the cable in a switched-off state THE D-MAT HEATING SHEET Is intended for outdoor use as anti-freeze protection in industrial applications and in the construction industry – for example, for the warming of the earth in excavation pits or of stored friable materials, the warming of cables on reels, maintenance of warmth in parts of machines or in tools, etc. The sheet is also suitable for use in extreme winter conditions. Technical parameters: IP 56 coverage; heated area 1.2×2.85 m (3.4 m 2 ); total sheet dimensions 1.5×3.05 m; 5 m supply lead ends in a SCHUKO plug. 230 V / 50 Hz; 9,6 kg. Type Output [W] PCC 90/3 90 Linear wattage Operating temperatures Temperature resistance OUTPUT [W] Type D-MAT 280 W/m2 Cat. No. 950 DM 3,4/280 5505000 Length [m] Resistance [�] Cat. No. 30 W/m −40…60 °C 180 °C 1) 3,0 587,8 2330250 PCC 150/5 PCC 210/7 150 210 5,0 7,0 352,7 251,9 2330252 2330254 PCC 300/10 300 10,0 176,3 2330256 Operating voltage 230 V / 50 Hz, IP 67 coverage, cable diameter 4–4.4 mm; 1×cold lead 1.5 m
ECOFLOOR ACCESSORIES F-BOARD FLOOR INSULATION F-boards prevent heat losses to the subfl oor structure. Recommended for fl oor reconstructions. Type Dimensions [mm] Thickness [mm] Packaging [boards in packet] Packets on the pallet Cat. No. F-BOARD 6 1250×600×6 6 6 67 5442016 F-BOARD10 1250×600×10 10 6 43 5442019 Useful information Dimensions 600 mm × 1250 mm (0,75 m 2 each) Thickness 6 mm or 10 mm Weight (kg/board) 1,8 (6 mm) 2,0 (10 mm) Material Density 32 kg/m3 Thermal Conductivity 0,029 W/m°k Compresive strenght 300 kN/m2 Water absorption (immersion) < 1,5 % by vol Water absorption (capillary) Nil Co-effi cient of Linear Expansion 0,07 mm/mK Flamibility B1 Extruded Polystyrene core with Polymer cement outer skin 25 Quantity supplied Cat. No. Gutter clip, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350000 Gutter clip 150, 1 package = 25 pcs. Material: frost-resistant plastic, suitable for self-regulating cable. Floor Tiles Tile Adhesive ECOFLOOR Mat F-BOARD Tile Adhesive 1 package 2350007 Downpipe clip, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350003 Chain, 1 package = 10 m. Material: frost-resistant plastic. 1 package 2350004 GRUFAST fastening strip, 1 unit =10 m. Material: zinc-coated steel. Not suitable for outdoor environments. 1 unit 4200013 Plastic cable clip, 1 package = 50 pcs 1 package 1200000 Flex strip, 0.5 m length 1 2350002 T strip, 0.5 length 1 2350008 REPAIR KIT Kit no. 1 for P1P cable repair 1 5030121 Kit no. 2 for ADSV, ASL1P Mat LD and LDTS cable repair 1 5030122 Kit no. 3 for PSV, MADPSP and ADPSV cable and mat repair 1 5030123 Kit no. 4 for connection and termination of self-limiting cables 1 5030124 Kit no. 5 for MADPSP installed under asphalt 1 5030125 OTHER ACCESSORIES Aluminium self-adhesive tape, 50 mm width, 50 m length 1 2832515 SYFOK-B – fi xation cables for nonstandard eaves and valleys. Material: frost-resistant plastic. B/20 (20 m) B/10 (10 m) 2350010 2350011 SYFOK-P – fi xation cables for nonstandard eaves, gut- P/20 (20 m) 2350012 ters and valleys. Material: frost-resistant plastic. P/10 (10 m) 2350013 Cable spacer for 4,5 cm loops, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350014 C-shaped copper roof spacer, 1 package = 25 pcs 1 package 2350005 Sub-Floor – or Existing Floor (before renovation)
Page 1 and 2: Product catalogue April 2012
Page 3 and 4: ECOSUN - radiant heating panels low
Page 5 and 6: LOW TEMPERATURE PANELS ECOSUN G - a
Page 7 and 8: RADIANT PANELS MR - marble radiant
Page 9 and 10: SUPPORTS FOR GR PANELS - for applic
Page 11 and 12: IRC RADIANT PANELS - FENIX has manu
Page 13 and 14: Overview of special ECOFLOOR heatin
Page 15 and 16: ECOFLOOR HEATING MATS LDTS or LSDTS
Page 17 and 18: KITS FOR DO-IT-YOURSELF INSTALLATIO
Page 19 and 20: ADSV+ heating cable, a two-conducto
Page 21 and 22: MAPSV heating cable, a single-condu
Page 23: ADSV+ heating cable, a two-conducto
Page 27 and 28: ECOFILM F - underfl oor heating fi
Page 29 and 30: ECOFILM MHF - mirror fogging preven
Page 31 and 32: ULTRATHERM RADIANT PANELS ULTRATHER
Page 33 and 34: ATLANTIC F 117 - electric convector
Page 35 and 36: ANALOG ROOM THERMOSTAT Product Desc
Page 37 and 38: STORAGE HEATERS 1 2 3 5 1 storage b
Page 39 and 40: Argentina Armenia Australia Austria

Product catalogue

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?