Product catalogue

More documents

Recommendations

Info

THERMOSTATS AND CONTROLS DIGITAL PROGRAMMING THERMOSTATS <strong>Product</strong> Description Cat. No. FENIX TFT WATTS 760 Aube TH 232 FENIX Therm 350 EBERLE FIT 3U VTM 3000 Digital touch screen thermostat; option of selecting the background colour. Operating modes ‘fl oor only’, ‘room only’, ‘fl oor+room’; option of measurement with the help of two external (fl oor) probes, PWM regulation or fi xed temperature difference. 4 preset and 3 user programmes (10 temperature changes in 15 minute steps, with the shortest time period being 1 hour). Modes: according to the programme, manual mode, holiday, party, non-freezing temperature, switched off. 16 A switching contact; range of temperature settings 5–35 °C in 0.5 °C steps; option of setting the min. and max. fl oor temperature; calibration of sensors. A fl oor probe is included with the thermostat. Programmable thermostat with Fuzzy-Logic option (so-called Intelligent Thermostat) or fi xed temperature difference (settable at 0.5–7 °C). Operation modes “fl oor only”, “room only”, “fl oor + room”. 5 preset + 2 user programmes - up to 12 temperature changes/day with the user programmes. Room temperature setting 5–37 °C in 0.5 °C steps. Option to set a max. and min. fl oor temperature. Setting of switched wattage for the exact correction of the room temperature, 16 A switching contact, holiday operation, permanent temperature mode, switch, key lock, display backlight, choice of two frames – square, round. IP 21 coverage. The back-up of data is provided by a lithium battery – the fi rst charging session must last at least 24 hours (it is for formatting the capacity of the battery). This digital thermostat with settable temperature readings (room only / fl oor + room / fl oor only) is suitable for radiant panels, convection heaters and also fl oor heating. The thermostat has a 1-week program – it is possible to switch between the comfort (‘day’) and attenuation (‘night’) temperature up to 4 times per day. Other functions: holiday mode, non-freezing temperature mode, option of temporary temperature adjustment, display of current temperature, self-learning mode option (‘fuzzy logic’). IP 21 rating, 16 A switching contact. A 3 m fl oor probe is part of the thermostat. 230 V power supply. An AC 130-03 snubber must be connected to the thermostat circuit during the switching of induction load (e.g. when the heating is connected via a contactor) – it should be as close to the contactor as possible, ideally directly at its contacts. Without the snubber, spontaneous resetting of the thermostat will take place. This snubber is included with the purchased thermostat. Programmable digital thermostat with Fuzzy-Logic (so-called Intelligent Thermostat) and three separate functions: room and fl oor thermostat, fl oor thermostat (factory set) or room thermostat; two preset programs, possible to use own settings. Each day can be set separately, four events per day. Air temp. range/fl oor range 5–37 °C, 16 A, frost protection program, IP 21, power reserve 36 hours, 230 V; equipped with a LED dual function, switch on/off, lock, adaptive function and switch-on time (as a percentage for the last 24 hours, 7 days, 30 days or 365 days). Floor probe is part of the package. Programmable thermostat with PWM regulation or fi xed temperature difference. Operating modes “fl oor only”, “room only”, “fl oor + room”. 13 programmes – 9 pre-set, 4 for users (4 temperature changes per day in 30 minute steps), holiday operation, permanent temperature or permanent attenuation modes, maintenance of a selected temperature for a set period. Temperature settable from 5–37°C in 0.5 °C steps (fl oor and room). Option to set the max. and min. fl oor temperature, option of probe calibration. Technical parameters: 16 A switching contact, switch, key lock, back-lit display, automatic change to summer time. Floor probe is part of the package. Lithium battery used for data back-up – the fi rst charging must last at least 24 hours (formatting of the capacity of the battery), IP 30. Selection of weekly or daily programme, selection of the modes “fl oor only”, “room only”, “fl oor + room”. 6× daily switching between the pre-set comfort and attenuation temperatures. Option to manually change the temperature with an automatic return to the programme. Other functions: permanent maintenance of comfort or attenuation temperatures, anti-freeze protection, permanent maintenance of manually set temperature (simulation of an analogue thermostat), setting of max. and min. fl oor temperature, operating hour counter. Data and programme back-up in the EEPROM memory (up to 10 years), time and date back-up with the help of a large-capacity capacitor – period of back-up 6 hours. Technical parameters: switching contact 16 A / 230 V, max. switched wattage 2 kW, key lock, fl oor probe part of the package. IP 31. 34 4200152 4200123 4200118 4200128 4065005 4200134
ANALOG ROOM THERMOSTAT <strong>Product</strong> Description Cat. No. FLASH 25800 10 A, bimetallic thermostat with signaling, without temperature setback, 5–35 °C, IP 30. 4200110 EBERLE RTR - E 6124 10 A, with temperature setback 5 K, accuracy 0.5 K, 5–30 °C, IP 30. 4066020 FENIX-Therm 100 12 A, IP 21, heat differential of 0.5 °C, switch, 0–45 5–30 °C (ambient air), 5–50 °C (fl oor) 35 4200130 Frame for FENIX-Therm 100 Frame for use in wall mounting. 4200131 TH 810 T WIRELESS REGULATION SUITABLE FOR ECOSUN, MR AND GR PANELS BPT-SP wireless control unit – transmitter SP1 wireless receiver – fl ush-mounted SP2 wireless receiver – wall-mounted SP3 wireless receiver – socket PH-TS 20 programmable socket PH-CJ 37 SW central control unit GSM PH-GST 1 module The outlet thermostat adjusts the outlet according to the set room temperature. Temperature range is 5–30 °C (±1 °C). Optional mode for cooling/heating.Maximum switched current is 16 A (3,500 W). Maximum time for backed-up operation is 3 hours. Displays both set and current temperature in the room. Does not allow time programming. IP 20. 2–39 °C, adjustable difference of switching 0.1–1.5 °C, PI-PWM, fuzzy logic, 9 select programmes, each programme up to six changes, option of differentiating between an odd and even week, 255 transmitters can be connected to different addresses, simple pairing receiver/transmitter, summer regime function, holiday, party, 2×1.5 V AA power supply, placement on a wall or on a stand, range 35 m in buildings , up to 300 m in open areas, frequency 433.92 MHz, option of control using a text message with the help of an additional GSM module, GST 1, (not included in the price). IP 20. 16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms the change, frequency 433.92 MHz, indication of operational status with LED diodes, connection in mounting box. 16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms the change, frequency 433.92 MHz, indication of operational status with LED diodes, to be mounted on a wall or in mounting box. 16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms the change, frequency 433.92 MHz, indication of operational status with LED diodes, insertion into a 230 V / 16 A socket. The PH-TS 20 socket is basically an SP3 receiver to which buttons, a display and a temperature sensor were added so that the socket can be programmed directly and the BPT-SP control unit is no longer needed for its operation. The PH-TS 20 programmable socket can also communicate wirelessly with the PH-CJ 37 SW central unit, and therefore it can also be included in the PocketHome central regulation system. IP 20. The PH-CJ 37 SW central regulation unit is intended for the control of all BPT-SP units in the building. Using it creates a central regulation system for the whole building. The package also includes PocketHome software for the PC, a connecting cable for the PC’s serial COM port and reduction to USB (RS232/USB convertor). The software enables the programming and control of the whole regulation system to be managed signifi cantly better and more clearly than by using the buttons and display of the PH-CJ 37 SW central control unit. IP 20. The GSM module is used for the remote control of the Fenix BPT-SP control unit. With the help of text messages from your mobile phone, the temperature in the room can be regulated or the current state of the control unit can be ascertained. SIM card is not included in the price. 4065110 4500330 4500332 4500334 4500336 4500342 4500340 4500338
Page 1 and 2: Product catalogue April 2012
Page 3 and 4: ECOSUN - radiant heating panels low
Page 5 and 6: LOW TEMPERATURE PANELS ECOSUN G - a
Page 7 and 8: RADIANT PANELS MR - marble radiant
Page 9 and 10: SUPPORTS FOR GR PANELS - for applic
Page 11 and 12: IRC RADIANT PANELS - FENIX has manu
Page 13 and 14: Overview of special ECOFLOOR heatin
Page 15 and 16: ECOFLOOR HEATING MATS LDTS or LSDTS
Page 17 and 18: KITS FOR DO-IT-YOURSELF INSTALLATIO
Page 19 and 20: ADSV+ heating cable, a two-conducto
Page 21 and 22: MAPSV heating cable, a single-condu
Page 23 and 24: ADSV+ heating cable, a two-conducto
Page 25 and 26: ECOFLOOR ACCESSORIES F-BOARD FLOOR
Page 27 and 28: ECOFILM F - underfl oor heating fi
Page 29 and 30: ECOFILM MHF - mirror fogging preven
Page 31 and 32: ULTRATHERM RADIANT PANELS ULTRATHER
Page 33: ATLANTIC F 117 - electric convector
Page 37 and 38: STORAGE HEATERS 1 2 3 5 1 storage b
Page 39 and 40: Argentina Armenia Australia Austria

Product catalogue

Create successful ePaper yourself

Delete template?

Save as template?