Equipment YOU Need.sdr - PCI Magazine
Equipment YOU Need.sdr - PCI Magazine
Equipment YOU Need.sdr - PCI Magazine
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A reactor was requested for the preparation<br />
of a pre-polymer. Requirements for this<br />
product included:<br />
• Stainless Steel Construction<br />
• Nitrogen blanketing<br />
• Temperature control – heat to<br />
initiate reaction and control to<br />
prevent run away.<br />
• Agitation<br />
• Material Handling<br />
A jacketed reactor was built to the<br />
customers requirements.<br />
Corporate Office & Warehouse<br />
1320 Industrial Blvd.<br />
P. O. Box 529<br />
Southampton, PA 18966-0529<br />
215-364-0240<br />
Fax: 215-364-4397<br />
www.ewkaufmann.com<br />
Pre-Polymer Reactor<br />
A Temperature<br />
controller was<br />
designed with<br />
cascade control to<br />
maintain the<br />
temperature of the<br />
reaction within a<br />
predefined range.<br />
For Order Entry Outside 215 Area - Call 1-800-635-5358<br />
The unit was fitted with a turbine agitator to<br />
provide sufficient mixing for the reaction.<br />
(NEMA7<br />
Housing Not<br />
Shown)<br />
Coriolis meters were employed to provide<br />
accurate material handling and Batch<br />
controllers were fitted with NEMA7<br />
housings for use in the Class 1 Div 1<br />
environment.
Change language