Hicom 150 Programming Guide - Strategic Business Systems, Inc.

15_12.c12
Service For internal distribution only
Access Protection
12.7 Access Protection
12.7.1 Logging on with User Name and Password
Security Concept
In order to allow authorized users to access Hicom 150 E Office and prevent unauthorized
accesses, users must be identified by means of a user name and authenticated
by means of a password. This applies to all local and remote administration and
maintenance procedures via Hicom Assistant E Office, Hicom Assistant T, Hicom Assistant
C Office, Hicom Assistant TC Office and AMHOST.
As of Release 3.0 SMR-C, it is possible to choose from among the following security
concepts when performing country initialization the first time the system is booted:
● Variable password concept (default)
● Fixed password concept
Example of initial logon via Hicom Assistant T
Step Input Explanation
1. *95 Start system administration
2. 31994 Default user name
3. 31994 Default password
Only an optiset E memory telephone can accept input in the form of alphanumeric
characters. Do not change a user name or a password to a name that includes alphanumeric
characters unless Hicom Assistant T or Hicom Assistant TC will always
use an optiset E memory telephone.
Step Input Explanation
4. XXXXX Enter new password (max. 15 characters)
5. XXXXX Confirm password entered under point 4
6. 29-5 Country initialization
7. X As of Release 3.0 SMR-C: Define password concept:
1 = Variable password concept
2 = Fixed password concept
8. XX Enter country code (refer to page A-29). The system
is now booted with the country-specific default
data.
G281-0666-01, August 2000
12-38 Hicom 150 E Office, Rel. 2.0-3.0, Service Manual