Hicom 150 Programming Guide - Strategic Business Systems, Inc.

15_7.c07
Implementing Features For internal distribution only
Features for Incoming External Traffic
Configuring the Feature Using Hicom Assistant T
Configure the feature using Hicom Assistant T as follows:
Step Action
1. Enter DID numbers
2. 16-11 => Incoming calls - DID numbers
3. Enter intercept criteria
4. 16-12 => Incoming calls - Intercept, day
5. 16-13 => Incoming calls - Intercept, night
6. 16-14 => Incoming calls - Intercept mode
7. Enter system number
8. 20-2 => ISDN parameters - System stn number
Configuring the Feature Using Hicom Assistant E Office
Configure the feature using Hicom Assistant E Office as follows:
Step Action
1. Enter DID numbers
Options
2. Set up station
3. Stations
4. Enter system number
Options
5. Lines/networking
6. Routes
7. Enter intercept criteria
Options
8. System parameters
9. Diversion criteria
G281-0666-01, August 2000
7-174 Hicom 150 E Office, Rel. 2.0-3.0, Service Manual