Hicom 150 Programming Guide - Strategic Business Systems, Inc.

15_0.c00
For internal distribution only
Major New Features in Release 3.0 of Hicom 150 E Office
Unless otherwise indicated, the new features listed below are available in Release
3.0.
● New boards
OfficePro
CR8N
OfficeCom OfficePoint
*
Comm.
server
adapter
* Release 1.0 and later.
● Hicom cordless EM base stations receive power from EPSU1/EPSU2 (page 3-
84).
● Information on upgrading the software to Release 3.0 (Section 6.3.2.2 on Page
6-24).
● Dual assignment of function keys on optiset E telephones and key modules (Section
9.2 on Page 9-3).
● Additional Hicom Attendant P Office functions (Section 9.8 on Page 9-41)
● New features in Release 3.0
– Ability to remove individual members from a group (Section 7.3.12 on Page
7-75)
– Mobile PIN (Section 7.4.5 on Page 7-142)
– Team/top configurations (Section 7.12.15 on Page 7-352)
The current executive/secretary functions (see Section 7.12.5 on Page 7-
327) are available in Release 2.2 and earlier versions. Release 3.0 and later
versions use top configurations for executive/secretary functions.
– Ability to delete station numbers (Section 7.12.14 on Page 7-350)
– Additional QSig features: Message waiting indication (MWI), central crosssystem
busy signaling (possible in Octopus E 300/800 direction only) (Section
7.13.19 on Page 7-409)
– Hicom 150 E Office on the LAN: CSTA over IP and CDRC over IP
(Chapter 13).
– Euro-ISDN feature AOC-S (advice of charges at start of call) (Section 7.15.8
on page 7-468)
G281-0666-01, August 2000
New-2 Hicom 150 E Office, Rel. 2.0-3.0, Service Manual