Paints and Coatings Auxiliaries for the coating of surfaces - Clariant

Product range
Waxes and wax micropowders
based on raw montan wax
Licowax KLE is an ester wax which
already contains the optimum amount
of emulsifier.
Ceridust 5551 is a micronized ester
wax. Due to its polar character it
is best suited for use in aqueous
systems.
Waxes and wax micropowders
based on polyethylene wax
Licowax PE 520 is a colorless, odourless,
hard, partially branched-chain
polyethylene wax of low density.
Because of its molecular structure
Licowax PE 520 has a pronounced
matting effect on paint. It is readily
dispersible in hot solvent and produces
fine dispersions with good resistance
to settling.
8
Licowax PED 521 and Licowax PED
522 are partially branched-chain
polar polyethylene waxes.
The Ceridust grades are micropowders
produced by a special process.
Ceridust 3620 is a linear, hard polyethylene
wax. Ceridust 9615 A is a
modified linear polyethylene wax.
Ceridust 6721 is a new brand of a
PP blend offering good matting
and outstanding soft-feel effect.
Ceridust 3715 and 3719 are noted for
their excellent wettability by water or
other polar solvents. Ceridust 9610 F,
Ceridust 9630 F, Ceridust 9325 F and
TP Ceridust 9322 F are hard polyethylene
waxes of linear structure whose
effect is optimized by polytetrafluoroethylene
(PTFE). They are noted for
excellent slip.
Ceridust 3920 F and TP Ceridust 3921 F
are PTFE modified polyethylene waxes
with a very low average particle size
diameter of approx. 6.0 µm. Therefore
they are especially suitable for improving
the surface lubricity and slip
properties in thin film applications.
The Ceridust grades can be finely
dispersed in paints of different systems
simply and with little mechanical
energy.