PROCESS TECHNOLOGY TRAINING GUIDE - John Zink Company
PROCESS TECHNOLOGY TRAINING GUIDE - John Zink Company
PROCESS TECHNOLOGY TRAINING GUIDE - John Zink Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
THERMAL OXIDIZERS<br />
TO110<br />
Prerequisite: None<br />
2-DAY COURSE<br />
AUTHORIZED<br />
IACET PROVIDER<br />
1.4 CEUs<br />
DESIGNED FOR:<br />
Engineers, operators, maintenance, safety and training personnel from<br />
hydrocarbon and chemical processing plants and production operations<br />
that handle hazardous and non-hazardous organic waste disposal in their<br />
daily operations.<br />
COURSE OVERVIEW:<br />
This course focuses on gaseous and liquid waste thermal oxidizers and covers a<br />
broad range of thermal oxidation topics. Course begins with thermal oxidation<br />
and combustion basics and advancing through the fundamental system<br />
types – sulfur, low NOx, chlorinated and down-fired/salt. The course addresses<br />
CFD modeling, pre- and post-treatment, alternative technologies and control<br />
systems. Maintenance and service are also discussed. Thermal oxidizer tests<br />
and demonstrations will be conducted at <strong>John</strong> <strong>Zink</strong>’s new state-of-the-art<br />
thermal oxidation test facility.<br />
SOME TOPICS COVERED DURING THE COURSE INCLUDE:<br />
• Combustion fundamentals<br />
• Design guidelines<br />
• Instrumentation and controls<br />
• Waste types<br />
• Pollution emissions<br />
• Equipment components<br />
• Fume and vent systems<br />
• Sulfur plant equipment<br />
• Chlorinated systems<br />
• Down-fired systems<br />
• Low-NOx systems<br />
• Ultra low-NOx systems<br />
• NOx and N2–bearing wastes<br />
• Oxidizer maintenance and service<br />
LOCATIONS, DATES AND PRICES:<br />
Tulsa, OK September 29 – 30, 2011 $1,595<br />
Tulsa, OK September 24 – 25, 2012 $1,595<br />
THERMAL OXIDIZER OPERATIONS<br />
TO126<br />
Prerequisite: None<br />
1 TO 2-DAY COURSE<br />
AUTHORIZED<br />
IACET PROVIDER<br />
1.4 CEUs<br />
DESIGNED FOR:<br />
Engineers, operators, maintenance, safety and training personnel from<br />
hydrocarbon and chemical processing plants and production operations<br />
who handle hazardous and non-hazardous organic waste disposal in their<br />
daily operations.<br />
COURSE OVERVIEW:<br />
This course is usually one or two days and covers the basics of combustion<br />
and thermal oxidizers. It can also be customized to fit your specific needs. This<br />
course can also be used to train operators and may include a simulator of the<br />
actual control system that will be used in the plant.<br />
SOME TOPICS COVERED DURING THE COURSE INCLUDE:<br />
• Combustion basics<br />
• Thermal oxidizer basics<br />
• Fume incineration<br />
• Down-fired systems<br />
• Chlorinated systems<br />
• Sulfur plant systems<br />
• NOxidizer® and NOx reduction<br />
• Furnace refractory<br />
• CFD as a design tool<br />
• Hazardous waste disposal<br />
• Controls<br />
• Operation and maintenance<br />
LOCATIONS, DATES AND PRICES:<br />
Offered as demanded.<br />
ON-SITE<br />
COURSE<br />
Enroll online today at johnzinkinstitute.com<br />
13
Change language