PROCESS TECHNOLOGY TRAINING GUIDE - John Zink Company

More documents

Recommendations

Info

PROCESS BURNER FUNDAMENTALS PB107 Prerequisite: PB155 4 Call the John Zink Institute today at 918.234.5710 2-DAY COURSE AUTHORIZED IACET PROVIDER 1.4 CEUs DESIGNED FOR: Engineers, operators, maintenance, safety and training personnel from hydrocarbon and chemical processing plants around the world. COURSE OVERVIEW: Process Burner Fundamentals provides introductory instruction related to the essential theory and practical application of process burners. In this two-day course, a broad range of skills will be covered. • Review the basics of combustion, heat transfer and fluid flow, with instruction on how they impact burner and heater performance • Operate a heater safely and more efficiently • Distinguish a good flame from a poor flame • Understand different types of typical burners, their operation maintenance and troubleshooting • Diagnose problems with heaters and burners to determine necessary actions to correct the problems • Maximize the thermal efficiency of your heating equipment • Install burners in accordance with manufacturer’s drawings • Maintain burners to obtain optimal performance • Witness live demonstrations that illustrate principles covered in the course SOME TOPICS COVERED DURING THE COURSE INCLUDE: • Fluid flow • Combustion fundamentals and safety • Burner installation and maintenance • Heat transfer • Burner fundamentals • Heater operations • Fuels • Burner demonstrations • Troubleshooting/service • Pollution emission basics LOCATIONS, DATES AND PRICES: Tulsa, OK September 19 – 20, 2011 $1,595 Tulsa, OK April 23 – 24, 2012 $1,595 Tulsa, OK October 1 – 2, 2012 $1,595 TPCP-0058 ADVANCED PROCESS BURNERS PB108 Prerequisite: PB107 2-DAY COURSE AUTHORIZED IACET PROVIDER 1.4 CEUs DESIGNED FOR: Engineers, operators, maintenance, safety and training personnel from hydrocarbon and chemical processing plants around the world. COURSE OVERVIEW: Two-day course designed as a follow-up course to Process Burner Fundamentals (PB107). Participants will be shown the basics of some of the latest diagnostic techniques including: • Techniques for assessing burner and heater performance • Determine what causes burner flames to interact • The effect of having burners placed too close to each other and/or too close to furnace walls/tubes • What is involved in performing a computational fluid dynamics (CFD) analysis and the difficulties and benefits of conducting such an analysis • How CFD can be used to solve advanced burner-burner/burner-furnace interactions • The basics of heater design The important factors that impact pollution emissions (especially NOx and noise) are discussed, including the techniques for minimizing them. Alternate fuels and oil firing are discussed. Participants will see the key parameters in burner testing in a safe and environmentally acceptable manner, as well as how to identify problems with and methods for firing waste fuels. Some live demonstrations will be used to illustrate concepts covered in the course. SOME TOPICS COVERED DURING THE COURSE INCLUDE: • Advanced process diagnostics • Oil firing • Special fuels • General pollutant emissions • NOx emissions • Noise • CFD modeling • Burner testing • Live demonstrations LOCATIONS, DATES AND PRICES: Tulsa, OK September 21 – 22, 2011 $1,595 Tulsa, OK April 25 – 26, 2012 $1,595 Tulsa, OK October 3 – 4, 2012 $1,595
PROCESS BURNERS CUSTOM PB116 Prerequisite: None UP TO 3-DAY COURSE UP TO 2.1 CEUs DESIGNED FOR: Engineers, operators, maintenance, safety and training personnel from hydrocarbon and chemical processing plants around the world. COURSE OVERVIEW: Process Burners Custom presents introductory information related to the essential theory and practical application of process burners. This is a customized course where the client selects the topics to be covered. It typically ranges from one to three days in length depending on the topics selected. TYPICAL COURSE OBJECTIVES: • Discuss the basics of combustion • Describe the importance of fuel consumption • List the 3 burner types and 6 Ms of combustion • Discuss where to measure draft and excess O2 • Discuss blowoff and liftoff • Describe proper burner operation • Identify common burner problems and possible causes and solutions SOME TOPICS COVERED DURING THE COURSE INCLUDE: • Combustion fundamentals • Combustion safety • Burner installation and maintenance • Heat transfer • Heater fundamentals • Burner fundamentals • Heater operations • Fuels • Troubleshooting and service • Noise • Cfd modeling LOCATIONS, DATES AND PRICES: Offered as demanded. ON- DEMAND COURSE FIRED HEATER RELIABILITY MANAGEMENT: ADVANCED OPERATION AND RISK ASSESSMENT PB134 - Prerequisite: None 1-DAY COURSE AUTHORIZED IACET PROVIDER 0.7 CEUs DESIGNED FOR: Engineers, operators, maintenance, safety and training personnel working with or responsible for fired heaters. COURSE OVERVIEW: Fired Heater Reliability Management allows students to experience the science of optimizing reliability and performance in the life cycle of a fired heater. This course also demonstrates the essential theory provided in American Petroleum Institute (API) recommended practices, as well as practical approaches to performance monitoring, advanced operation, tube inspection, root cause failure analysis, reliability monitoring, risk assessment and safety. SOME TOPICS COVERED DURING THE COURSE INCLUDE: • Heater performance monitoring • Tube condition inspection and assessment systems • Tube temperature measurements • API 579 fitness for service • API 580 risk assessment • Root cause failure analysis • Performance and reliability strategies LOCATIONS, DATES AND PRICES: Tulsa, OK September 23, 2011 $695 Tulsa, OK April 27, 2012 $695 Tulsa, OK October 5, 2012 $695 Enroll online today at johnzinkinstitute.com 5
Page 1 and 2: 2011-2012 PROCESS TECHNOLOGY TRAINI
Page 3 and 4: WELCOME TO THE JOHN ZINK INSTITUTE
Page 5: TESTIMONIALS “ My thanks to all a
Page 9 and 10: PROCESS BURNERS PB150-German, PB159
Page 11 and 12: PROCESS BURNER OPERATOR TRAINING PB
Page 13 and 14: COMBUSTION DYNAMICS CO137 Prerequis
Page 15 and 16: THERMAL OXIDIZERS TO110 Prerequisit
Page 17 and 18: TROUBLESHOOTING VIBRATION OF INDUST
Page 19 and 20: LOGISTICS HOTEL RESERVATIONS The JO

PROCESS TECHNOLOGY TRAINING GUIDE - John Zink Company

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?