KettenWulf roller chains

G
KettenWulf G gall chains
|68
KettenWulf G gall chains
KW G DIN 8150
Pitch [mm]
Min. clearance width
[mm]
KettenWulf Gall Chains in accordance with DIN 8150
Gall chains, according to DIN 8150, are employed
mainly as load chains or for drives with small loads
and low chain speeds. All gall chains from Ketten-
Wulf are available as hardened materials. Hardening
of the material considerable increased the
fracture load and wear resistance. Additionally, connecting
components are available upon request.
Max. bush Ø [mm]
Max. pin Ø [mm]
Max. pin length [mm]
Type of chain p b 1 d 3 d 1 l L S i / S a n g f F B ≈q
max. length
Connecting pin [mm]
KW G20 20 15 8 6 28,0 33,0 2,0 2 15 0,24 12500 1,1
KW G25 25 18 10 8 36,0 42,0 3,0 2 18 0,48 25000 1,8
KW G30 30 20 11 9 51,6 57,5 3,0 4 20 1,08 40000 3,4
KW G35 35 22 12 10 53,0 61,0 3,0 4 26 1,2 60000 4,5
KW G40 40 25 14 12 56,5 63,5 3,0 4 30 3,72 80000 5,0
KW G45 45 30 17 14 63,0 70,0 3,0 4 35 1,68 100000 7,0
KW G50 50 35 22 18 86,2 97,0 4,5 4 38 3,24 150000 10,6
KW G55 55 40 24 21 108,0 115,0 6,0 6 42 5,04 390000 15,5
KW G60 60 45 26 23 114,0 120,0 6,0 6 46 5,52 500000 17,4
KW G70 70 50 32 28 148,0 157,0 6,0 6 55 10,08 375000 34,0
KW G80 80 60 36 32 159,0 171,0 6,0 6 60 11,52 500000 39,0
KW G90 90 70 40 36 184,0 200,0 7,0 6 70 15,12 750000 53,0
KW G100 100 80 45 40 224,0 234,0 7,0 8 80 22,95 10000000 77,0
›› The indicated fracture forces correspond to DIN 8150. We shall be glad to inform you of the higher effective fracture forces on
request.
Plate thickness [mm]
Plate number
Height [mm]
Link surface [cm²]
Fracture force [N]
Weight [kg/ m]