Technical catalogue Technical catalogue - AJ Solutions

Cooling Cooling Cooling capacity capacity correction correction factor
factor
The cooling capacity in other conditions than nominal are obtained by multiplying the nominal values shown at “Technical data” by the respective
correction factor “K”.
OAT OAT [°C]
[°C] – Outdoor Outdoor termperature
termperature
K
LWT LWT [°C] [°C] – Leaving water temperature
EUROKLIMAT EUROKLIMAT EUROKLIMAT Spa Spa Spa
IPE2008_2.0_uk 16
IP IPE IP
-20°C 20°C -5°C 5°C 5°C 0°C +5°C +5°C +7°C +7°C +10°C +10°C +12°C +12°C +15°C +15°C
+15°C
25°C 25°C
0,49 0,49 0,64 0,64 0,74 0,74 0,78 0,78 0,86 0,86 0,86 0,90 0,90 1,00
1,00
30°C 30°C
0,44 0,44 0,55 0,55 0,70 0,70 0,74 0,74 0,79 0,79 0,79 0,84 0,84 0,89
0,89
35°C 35°C
0,41 0,41 0,51 0,51 0,65 0,65 0,69 0,69 0,74 0,74 0,74 0,79 0,79 0,84
0,84
40°C 40°C
40°C
Calculation Calculation example example
example
LT
LT version (Low temp.)
0,47 0,47 0,60 0,60 0,64 0,64 0,64 0,69 0,69
0,69
45°C 45°C 45°C
TR version (tropicalized)
IPE 301 Nominal cooling capacity (1) 86 86,6 86
kW
kW
Leaving water temperature (LWT) 10°C °C
Outdoor temperature (OAT) 35°C
K factor at these conditions 0, 0,76 0, 76
IPE 301 Nominal cooling capacity (1) 86,6 x x 0, 0,76 0, 76 = = 65 65,8 65
kW kW (10°C / 35°C)
WITH WITH OPTION OPTION “CON “CON-MOD”
“CON MOD”
(available for model 31 31 ÷ 14 1402 14
02 02) 02