Gas spring GF 10/22 - AL-KO
Gas spring GF 10/22 - AL-KO
Gas spring GF 10/22 - AL-KO
- TAGS
- www4.al-ko.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation instructions<br />
Tips and recommendations<br />
The gas <strong>spring</strong>s are designed specifically for your intended application and are supplied<br />
ready-for-installation. Please follow the operating instructions to ensure optimum performance<br />
of your gas <strong>spring</strong>s:<br />
■ Installation takes place with the piston<br />
rod directed downwards<br />
■ Impurities or colouring of the piston<br />
rod destroy the seal of the gas <strong>spring</strong><br />
■ The gas <strong>spring</strong> must not be twisted<br />
■ Avoid the occurrence of bending and<br />
lateral forces; therefore please only use<br />
suitable connecting parts<br />
■ Do not undertake any mechanical<br />
processing of the gas <strong>spring</strong><br />
■ Observe the stated maximum permitted<br />
tensile forces<br />
34 <strong>AL</strong>-<strong>KO</strong> <strong>Gas</strong> <strong>spring</strong> range<br />
■ Do not heat above 120°C!<br />
■ The gas <strong>spring</strong> is subject to high pressure<br />
(up to 200 bar)! Please do not open it!<br />
■ The alignment of the connecting parts in<br />
comparison with each other must be made in<br />
a clockwise direction; please do not dismantle<br />
the fastening fittings<br />
■ The standard gas <strong>spring</strong>s are designed for<br />
use in temperatures ranging from -30°C to<br />
+80°C; obviously we can also produce gas<br />
<strong>spring</strong>s for extreme application conditions if<br />
you require.