Quick Start Guide V8.4 - Geovision DVR Cards

More documents

Recommendations

Info

Troubleshooting Power Supply Issues When the Reset LED on the top of the Card is flashing red color or the four Status LEDs are not all on, it indicates that the GV-4008 Card is short of power supply. Make sure your power supply is of 400 watts at least. If not, replace it with the power supply of 400 or larger watts. The power supply issues should be solved. Adjusting the Video Settings in the Main System One distinct feature of GV-4008 Cards is their ability of hardware compression, providing you with higher system performance and DVD recording quality. To take full advantage of GV-4008 Cards, you can adjust the video settings, including the recording quality and frame rate, before running the GV-System. Set the video settings of the recorded files: Considering computer performance or recording quality, you may adjust the settings to meet your needs. 1. On the Main System, click the Configure button, select General Setting, select Camera 6 / Audio Install, and click Hybrid Camera Install. This dialog box appears. Figure 1-4
Video Capture Cards 2. Select the cameras you want to set up, and click the Configure button. This dialog box appears. Figure 1-5 3. In the Select Hybrid Camera field, select one camera to be configured. 4. Select the video attributes and recording quality. If you want to apply the same setting to all selected cameras, click the Finger button in each field. 5. The Enable hardware-compressed data FIFO option is enabled by default. When the option is enabled, the hardware-compressed data from the video IP device, such as IP camera, video server and compact DVR, will be transmitted directly to remote servers instead of being compressed again on the DVR. The remote servers include CMS-related servers and WebCam Server. This feature can decrease the system load of DVR but increase that of remote servers. 1 7
Page 1 and 2: Before attempting to connect or ope
Page 3: Contents Important Notice before Us
Page 10: Connecting Hardware Watchdog Insert
Page 15 and 16: Specifications Interface PCI-E Inpu
Page 19 and 20: Adjusting the Video Settings in the
Page 21: 1.3 GV-1120A, 1240A, 1480A 1 Video
Page 25: Connecting GV-NET/IO Card to GV-Com
Page 28: 1.4 GV-1008 The GV-1008, as a three
Page 32 and 33: Specifications Input Type 26 D-Type
Page 34 and 35: Connecting One GV-650A/GV-800A Card
Page 37 and 38: Specifications Interface Type PCI,
Page 39 and 40: Connecting One GV-600A Card 1 Video
Page 42: Specifications GV-600A Input Type 3
Page 48 and 49: To verify the drivers are installed
Page 50 and 51: 1.10 Comparison Chart (H/W Compress
Page 52 and 53: 1.11 Comparison Chart (S/W Compress
Page 54 and 55: 1.12 Comparison Chart (S/W Compress
Page 59 and 60: 2.2 Installing the System 2 Softwar
Page 61 and 62:
2.3 Program List The Surveillance S
Page 63:
2.4 User’s Manuals 2 Software Ins
Page 67 and 68:
Start/stop recording Set up recordi
Page 69 and 70:
Basic Operation 3. Click the Set Lo
Page 71 and 72:
Setting the System Log Location 3 B
Page 73 and 74:
3.3 Renaming the Camera You can giv
Page 75 and 76:
3.5 Changing the Recording Resoluti
Page 77 and 78:
3.6 Setting a Recording Schedule Yo
Page 80 and 81:
3.8 Backing up the Video You can ba
Page 82 and 83:
Playing the Backup Videos Open the
Page 84 and 85:
© 2010 GeoVision, Inc. All rights
Page 86:
3.2 Installing the System..........
Page 93:
Connecting Hardware Watchdog 1 Vide
Page 96 and 97:
10 2. Select the cameras you want t
Page 98 and 99:
Specifications Interface PCI-E Inpu
Page 102 and 103:
Adjusting the Video Settings in the
Page 104 and 105:
1.3 GV-1120A, 1240A, 1480A 18 GV-Co
Page 108:
Connecting GV-NET/IO Card to GV-Com
Page 111 and 112:
Specifications Interface Type PCI-E
Page 115 and 116:
Figure 1-14 1 Video Capture Cards 2
Page 117 and 118:
1.5 GV-650A, GV-800A 1 Video Captur
Page 119:
Video Capture Cards For the BNC-typ
Page 122 and 123:
1.6 GV-600A 36 There are two types
Page 124:
38 For the BNC-Type video capture c
Page 127:
1.7 Installing Two Cards 1 Video Ca
Page 132 and 133:
46 To verify the drivers are instal
Page 134 and 135:
1.10 Comparison Chart (H/W Compress
Page 136 and 137:
1.11 Comparison Chart (S/W Compress
Page 138 and 139:
1.12 Comparison Chart (S/W Compress
Page 143 and 144:
Connections with Two Video Capture
Page 145:
2.2 GV-Loop Through Card 2 Hardware
Page 148 and 149:
2.3 GV-NET Card V3.1 The GV-NET Car
Page 150:
3. You can connect a 3-Pin Internal
Page 153:
2 Hardware Accessories 4. Ensure to
Page 157:
2 Hardware Accessories 2. You can c
Page 160 and 161:
Specifications Input Output Interfa
Page 162:
Connections Following provides two
Page 166:
Extending Transmission over the Dis
Page 172 and 173:
Connections 86 Insert the GV-I/O 12
Page 175 and 176:
Overview DIP Switch Figure 2-30 3 E
Page 177 and 178:
Assigning Addresses to GV-I/O Box 1
Page 179:
2 Hardware Accessories 3. Multiple
Page 183 and 184:
Connections There are three ways to
Page 185 and 186:
Extending Transmission over the Dis
Page 189 and 190:
Overview DIP Switch 1 ON To change
Page 191 and 192:
Assigning Addresses to GV-I/O Box 4
Page 194 and 195:
2.12 Accessing GV-I/O Box over Netw
Page 196 and 197:
2.12.2 DHCP Connection 110 DDNS (Dy
Page 198:
112 2.12.2.2 Configuring GV-I/O Box
Page 204 and 205:
2.12.8 Changing Login ID and Passwo
Page 208 and 209:
3.2 Installing the System When you
Page 210 and 211:
3.3 Program List 124 The Surveillan
Page 213 and 214:
4.1 Main System 4 Screen Overview 1
Page 215 and 216:
4.2 ViewLog 1 2 19 18 17 16 15 14 2
Page 217 and 218:
Functional Panel The controls in th
Page 219 and 220:
The controls in the RPB Client wind
Page 221 and 222:
4.5 MultiView Viewer 4 Screen Overv
Page 223 and 224:
4.6 Center V2 14 1 15 17 16 17 18 1
Page 225 and 226:
4.7 Control Center Toolbar The cont
Page 227 and 228:
Troubleshooting GV-System is design
Page 229 and 230:
Troubleshooting 143
Page 231:
© 2010 GeoVision, Inc. All rights
Page 234 and 235:
iv 1.5.5 Setting Double Password fo
Page 236 and 237:
vi 3.3.2 Tracking in PIP View......
Page 239 and 240:
6.6.9 The “Advanced Logical Input
Page 241 and 242:
8.6.11 Output Control..............
Page 243 and 244:
11.2.3 Installing TwinDVR..........
Page 246 and 247:
Chapter 1 Configuring Main System .
Page 248:
1.16 Picture-and-Picture View .....
Page 252:
11 Network Enables the connection t
Page 258:
4. To switch between the mini and n
Page 263 and 264:
18 Setting the Event Database Locat
Page 269:
24 1.2.4 Setting Day and Night Reco
Page 273:
28 1.2.7 Launching from System Tray
Page 280:
In the Auto Gain Control window, cl
Page 287 and 288:
42 Activating Turbo Mode 1. Click t
Page 289 and 290:
44 1.4.2 Associate Monitoring You c
Page 291 and 292:
46 In ViewLog, a separate DST subfo
Page 295:
50 1.5.2 Changing Password on Login
Page 298 and 299:
1.5.5 Setting Double Password for V
Page 300 and 301:
1.6.2 Auto Login User without Acces
Page 309:
64 1.7.3 Searching Event Logs To se
Page 313 and 314:
68 1.8.3 I/O Schedule Set up a sche
Page 315:
70 1.9 Schedule Center The Schedule
Page 318 and 319:
Viewing Compacted Video Files After
Page 322:
1.9.3 Setting Backup Schedule You c
Page 325 and 326:
80 [Hotline Alert x] The event can
Page 327 and 328:
82 1.10.2 Setting Alert Notificatio
Page 331:
86 1.11.2 Setting Alert Notificatio
Page 336 and 337:
1. Select Tour Schedule on the Came
Page 341 and 342:
96 2. To set the recording mode to
Page 343 and 344:
98 1.14.3 Noise Filter The Noise Fi
Page 345:
100 1.16 Picture-and-Picture View W
Page 351:
106 1.19 Touch Screen Support The G
Page 354 and 355:
1.20 System Tools 1.20.1 Colorful M
Page 356 and 357:
1.20.2 Image Quality of DirectDraw
Page 358 and 359:
1.20.4 Deactivating Video Lost Beep
Page 360:
1.20.6 Fast Key Reference This opti
Page 363:
118 Chapter 2 Hybrid and NVR Soluti
Page 373:
128 2.6 PTZ IP Camera To set up the
Page 377 and 378:
132 2.9 Camera Mapping through GV I
Page 379:
134 2.10 Economic Mode The economic
Page 382:
2.11 On Demand Display 2 Hybrid and
Page 385:
140 3.12 Panorama View.............
Page 390 and 391:
Starting Object Tracking After the
Page 392:
3.1.2 Object Zooming If only one PT
Page 395 and 396:
150 3.2 Advanced Single Camera Trac
Page 397:
152 6. Select Support Zoom Function
Page 402:
3.4 Object Counting and Intrusion A
Page 407:
162 3.5 Object Index The Object Ind
Page 412:
3.6 Automatic Video Snapshots The V
Page 415:
170 5. To play images with Quick Se
Page 421 and 422:
176 3.9 Unattended and Missing Obje
Page 423:
178 3.9.2 Detecting Missing Objects
Page 430 and 431:
3.12 Panorama View Spliced from mul
Page 434 and 435:
3.13 Video Defogging Smoky environm
Page 437 and 438:
192 5. To set detection sensitivity
Page 444:
3.18 Advanced Unattended Object Det
Page 450 and 451:
3.20 Video Analysis Schedule A sche
Page 453 and 454:
208 Note: To use two or more of the
Page 455 and 456:
210 4.11 Fast Key Reference .......
Page 458 and 459:
The controls in the ViewLog window:
Page 461:
216 The option of Thumbnail View is
Page 464 and 465:
4.1.3 Bookmarking a Frame 4 Playing
Page 466 and 467:
4.1.4 Searching a Video Event 4 Pla
Page 468:
List Mode and Line Mode 4 Playing B
Page 471 and 472:
226 4.1.5 Merging and Exporting Vid
Page 476:
4.1.7 Saving Images You can save th
Page 479 and 480:
234 4.1.10 Advanced Settings The Se
Page 486:
4.2 Object Search This feature allo
Page 489 and 490:
244 The buttons on the Advanced Log
Page 492 and 493:
4.4 Quick Search Quick Search is a
Page 494:
4.4.1 Event Query Settings Click th
Page 497:
252 3. Type the connection informat
Page 501 and 502:
256 4.6 LAN ViewLog Using LAN ViewL
Page 504 and 505:
4.7.2 Retrieving Recordings from Mu
Page 506 and 507:
4.7.4 Resuming Backup 4 Playing Bac
Page 508 and 509:
To stop a connection, click the End
Page 510 and 511:
4.8.2 Running Remote Playback Clien
Page 513 and 514:
268 [Advanced] Select Advanced from
Page 516:
Preference Settings Figure 4-52 4 P
Page 520 and 521:
4.11 Fast Key Reference 4 Playing B
Page 523:
278 5. Click OK. The Backup dialog
Page 530 and 531:
5.4 Deleting Recorded Files To dele
Page 532 and 533:
5.5 Repairing Damaged File Paths 5
Page 534 and 535:
5.6 Repairing Damaged Video Files 5
Page 536:
Chapter 6 I/O Applications.........
Page 542 and 543:
Following illustrations can help yo
Page 544:
2. Input (N/O + Latch Trigger) + Ou
Page 548:
6.3.2 Setting Momentary and Maintai
Page 551 and 552:
306 6.3.5 Other Applications [Video
Page 553:
308 6.5 I/O Enable Setting You can
Page 563 and 564:
318 6.6.7 Editing Background Image
Page 566 and 567:
6.6.10 Managing a Group of I/O Devi
Page 569 and 570:
324 6.8 Virtual I/O Control Through
Page 571:
326 Chapter 7 Point-Of-Sale (POS) A
Page 576:
7.1.2 Data Capture Box Integration
Page 579 and 580:
334 7.2.2 Network Connection 1. Con
Page 581:
336 7.3 POS Device Setup To set up
Page 587:
342 7.6 Abnormal Transaction Alerts
Page 590:
7.7 Codepage Mapping 7 Point-of-Sal
Page 596 and 597:
7 Point-of-Sale (POS) Application 5
Page 598:
8.6.2 Host List....................
Page 601 and 602:
356 3. On any remote computer, open
Page 605:
360 8.2.2 Server Settings Figure 8-
Page 615 and 616:
370 3. Click the Settings tab, and
Page 617 and 618:
372 8.2.11 FTP Server Settings You
Page 619 and 620:
374 8.3 Single View Viewer After yo
Page 621 and 622:
376 8.3.1 Control Panel A control p
Page 623:
378 8.3.3 Video Recording Click the
Page 628 and 629:
8.3.7 PTZ Control Click the Camera
Page 630:
8.3.9 I/O Control The new interface
Page 633:
388 8.3.12 Picture-and-Picture View
Page 636:
[Monitor] Enable I/O and Schedule m
Page 639 and 640:
394 8.6 Multi View Viewer Multi Vie
Page 641 and 642:
396 9 Configure 10 Edit Host 11 Cam
Page 643 and 644:
398 8.6.3 Channel Status Informatio
Page 645 and 646:
400 8.6.5 Combining Multiple Hosts
Page 647 and 648:
402 8.6.6 Video Recording You can s
Page 649 and 650:
404 8.6.8 Hardware-Compressed or Me
Page 651 and 652:
406 8.6.10 Visual PTZ Control Panel
Page 653:
408 8.6.12 Remote ViewLog More than
Page 657 and 658:
412 8.6.15 Host Information To show
Page 659 and 660:
414 8.7 Multicast and Audio Broadca
Page 661 and 662:
416 8.7.2 Sending Audio Broadcast Y
Page 663 and 664:
418 Through the Web Interface of We
Page 665 and 666:
420 8.9 Remote Playback With the Re
Page 668 and 669:
8. To export the search results, se
Page 670 and 671:
8.13 Mobile Phone Applications With
Page 672 and 673:
8.13.1 Windows PDA GV-GView V2 is a
Page 674 and 675:
Playing Back the Recordings To play
Page 676 and 677:
Accessing I/O Devices To access the
Page 678 and 679:
Controlling PTZ Cameras To control
Page 680 and 681:
8.13.2 Windows Smartphone With the
Page 682 and 683:
4. Once the connection is establish
Page 684 and 685:
8.13.3 Symbian Smartphone With the
Page 686 and 687:
Playing Back the Recordings To play
Page 689 and 690:
444 8.13.5 3G Mobile Phone Without
Page 693 and 694:
448 2. Enter the IP address of your
Page 695 and 696:
450 Accessing Live View To access l
Page 697 and 698:
452 PTZ Speed Control for PTZ Camer
Page 699 and 700:
454 3. Select the desired recording
Page 701:
456 Access to a GV-IP device: 1. Do
Page 705 and 706:
460 8. In the single view mode, pre
Page 707 and 708:
E-Map Application E-Map displays th
Page 709 and 710:
464 9.2 Creating an E-Map File To c
Page 711 and 712:
466 9.2.1 Creating an E-Map File fo
Page 713 and 714:
468 9.3.1 Setting the Pop-up Map Fu
Page 715 and 716:
470 The controls in the Remote E-Ma
Page 719 and 720:
474 9.4.4 Viewing Host Information
Page 721 and 722:
476 9.5 E-Map Server The E-Map Serv
Page 723 and 724:
478 9.5.3 Setting E-Map Server Befo
Page 725 and 726:
480 9.5.5 Accessing Authentication
Page 727 and 728:
Short Message Service Via a GSM/GPR
Page 731:
486 [Message Filter] Figure 10-4 Se
Page 736 and 737:
10.4.2 Viewing SMS Log Click the SM
Page 738 and 739:
10.5 Password Security To prevent u
Page 741 and 742:
496 10.6.2 Setting Mobile Numbers T
Page 743 and 744:
498 Chapter 11 Useful Utilities ...
Page 745 and 746:
500 11.12.4 E-Mail Attachment Setti
Page 747 and 748:
502 11.1.1 Installing Dynamic DNS T
Page 751 and 752:
506 Setting up E-mail Notification
Page 753 and 754:
508 11.2 TwinDVR System TwinServer
Page 755:
510 11.2.1 Starting TwinServer 1. I
Page 759 and 760:
514 Testing Video Stream This funct
Page 762 and 763:
11.3 Watermark Viewer The GV-System
Page 764 and 765:
11.3.3 The Watermark Proof Window 1
Page 766 and 767:
4. Run DMPOS. exe. This dialog box
Page 768 and 769:
11.5.2 GV-Desktop Features The five
Page 770 and 771:
[Desktop Type] Select Windows or GV
Page 772 and 773:
11.6 Authentication Server The Auth
Page 774 and 775:
11.6.3 Creating a Client DVR You mu
Page 779 and 780:
534 2. Click the Setup Server butto
Page 781 and 782:
536 11.6.7 Remote Access from Contr
Page 783 and 784:
538 Accessing from Multi View Viewe
Page 786 and 787:
11.7.3 Customizing the Features Not
Page 788 and 789:
Restoring the System You can restor
Page 790:
11.8.1 The Media Man Tool Window Th
Page 793:
548 11.8.3 Adding a Disk Drive 1. C
Page 796:
11.8.6 Setting Up LED Panel A LED p
Page 799 and 800:
554 Note: Figure 11-46 1. It is rec
Page 804 and 805:
11.9.4 Manually Adding Files for Ba
Page 806 and 807:
[Backup File List] This tab display
Page 809 and 810:
564 11.10.2 Starting Backup Viewer
Page 813:
568 11.10.5 Using Remote ViewLog Us
Page 816 and 817:
11.11.2 Allowing Remote Control at
Page 822:
11.12 Report Generator With the Rep
Page 830 and 831:
4. Type the IP or domain name, ID a
Page 832:
11.13 Spot Monitor Controller GV-Co
Page 835:
590 11.13.2 Spot Monitor Panel With
Page 842 and 843:
2. Click the Display list. If you d
Page 844:
11.15.3 Setting Scanned Pages You c
Page 849 and 850:
604 11.16 GIS Recording GV-System c
Page 851 and 852:
606 11.16.2 Recording GPS Locations
Page 853 and 854:
608 11.16.4 Viewing GPS Locations d
Page 855 and 856:
610 11.16.5 Sending GPS Data to the
Page 857 and 858:
612 6. In the Account for GPS Recei
Page 860 and 861:
11.17.3 Setting up IP Devices 1. Do
Page 862:
11.18 MCamCtrl Utility The MCamCtrl
Page 872:
C. Certified PTZ Models for Object
Page 875 and 876:
630 F. Supported GPRS Models Brand
Page 877:
632 H. Display Ratio Supported by P
show all

Quick Start Guide V8.4 - Geovision DVR Cards

Create successful ePaper yourself

Delete template?

Save as template?