Quick Start Guide V8.4 - Geovision DVR Cards

590
11.13.2 Spot Monitor Panel
With the Spot Monitor Panel, you can switch screen divisions and channels as well as starting and
stopping page scan immediately. On the Main System, click the TV-Out button . This panel
appears.
1
2
3
Figure 11-78
The controls on the DSP Spot Monitor Panel:
No. Name Description
1 Spot x
4
5
6
7
8
Spot 1 is for screen display on the first monitor, and Spot 2 for that on the
second monitor.
2 Scan Automatically or manually rotates channels and stops rotation.
3 Previous Page Goes to the pervious page of the scanned pages.
4 Next Page Goes to the next page of the scanned pages.
5 Exit Closes the Spot Monitor Panel.
7 Switch Opens or closes the channel menu.
8 Channel Menu Displays the desired channel for single view.
9 Screen Division Sets screen divisions to 1, 4, 6, 8, 9, 10, 12 and 16.
10 Zoom Esc
After single view, click this button to restore the first scanned page, but
restore the last channel when the screen division is set to 1.