GV-AS Controller User Manual - ApexCCTV
GV-AS Controller User Manual - ApexCCTV
GV-AS Controller User Manual - ApexCCTV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.2.4.B Connecting <strong>GV</strong>-Readers and <strong>GV</strong>-GF Fingerprint Readers<br />
You can connect up to 2 units of <strong>GV</strong>-Readers and <strong>GV</strong>-GF1901/1902 readers to <strong>GV</strong>-<strong>AS</strong>Net.<br />
Multiple <strong>GV</strong>-Readers and <strong>GV</strong>-GF Fingerprint Readers can be connected with a single RS-<br />
485 cable to the RS485 B+ and B- on <strong>GV</strong>-<strong>AS</strong>Net. You will need to connect the <strong>GV</strong>-Readers<br />
or <strong>GV</strong>-GF Fingerprint Readers to external power supply.<br />
The figure and table shows the pin assignments for related connectors.<br />
142<br />
Figure 5-39<br />
Pin Function Pin Function<br />
RS485B+<br />
<strong>GV</strong>-Reader / <strong>GV</strong>-GF<br />
Fingerprint Readers<br />
Connection<br />
RS485B-<br />
<strong>GV</strong>-Reader / <strong>GV</strong>-GF<br />
Fingerprint Readers<br />
Connection<br />
To define each <strong>GV</strong>-Reader and <strong>GV</strong>-GF Fingerprint Reader, you need to use the <strong>GV</strong>-<br />
<strong>AS</strong>100/<strong>GV</strong>-<strong>AS</strong>110/<strong>GV</strong>-<strong>AS</strong>120 Web interface. See 5.2.5.B.g Extended Setting.
Change language