GV-AS Controller User Manual - ApexCCTV

More documents

Recommendations

Info

4.4.3.B Parameter Setting In the left menu, click Parameter Setting. This AS400 Parameter Configuration page appears. The contents of Parameter Setting change based on your settings for Door/Gate # in the Function Setting page (Figure 4-20). 76 Figure 4-21 IMPORTANT: Once connecting to GV-AS400, GV-ASManager will load its parameters to GV-AS400. That means some of the Parameter Settings you have configured here may be rewritten by GV-ASManager later.
4 GV-AS400 Controller [Interlock] When the option is enabled, the two mentioned doors will be interlocked, allowing only one door to be opened at a time. [Events] Set the parameters for the events. • When Door Control is selected in the Function Setting page (Figure 4-20), these options become available: Option Description Anti-Passback Enables or disables the Anti-Passback function. Lock Reset Time Sets the time (1 to 255 sec.) that a door remains open after which the door will automatically be locked. Held Open Time Sets the time (5 to 9999 sec.) that a door can be held open before an alarm is generated. Fire Action Locks or unlocks the door when a fire condition occurs. Otherwise, remains the door’s current state by selecting Unchanged. Alarm Continuous Time Sets the time (1 to 10 sec.) that the alarm will continuously go off before it ends. • When Parking Control is selected in the Function Setting page (Figure 4-20), these options become available: Option Description Anti-Passback See the same option above. Relay On Time Sets the time (1 to 255 sec.) that a gate remains open after which the gate will automatically be closed. Held Open Time Fire Action Alarm Continuous Time See the same option above. • When Elevator Control is selected in the Function Setting page (Figure 4-20), these options become available: Option Description Relay on Time Fire Action Alarm Continuous Time See the same option above. See the same option above. 77
Page 1 and 2:
GV-AS Controller Before attempting
Page 3 and 4:
Contents Welcome...................
Page 5 and 6:
4.1.2 Packing List ................
Page 7 and 8:
5.2.3 GV-ASNet Overview............
Page 9 and 10:
GV-ASNet GV-IO Box Cabinet Push But
Page 11 and 12:
1. GV-AS100 Controller
Page 13 and 14:
1 GV-AS100 Controller GV-AS100 can
Page 15 and 16:
1.1.3 GV-AS100 Board Layout Figure
Page 17 and 18:
1.2.1 Connecting a Wiegand Reader 1
Page 19 and 20:
1.2.4 Connecting the PC 1 GV-AS100
Page 21 and 22:
1.2.5 Connecting the Power 1 GV-AS1
Page 23 and 24:
Before programming GV-AS100, you al
Page 25 and 26:
1.3.2 Accessing the Card Manager 1
Page 27 and 28:
1.3.4 Setting Parameters You can de
Page 29 and 30:
1.3.5 Displaying System Information
Page 31 and 32:
1.4 Web-Based Configurations 1 GV-A
Page 33 and 34:
2. GV-AS110 Controller
Page 35 and 36: 2 GV-AS110 Controller GV-AS110 can
Page 37 and 38: Wire color Definition Red 12V Black
Page 39 and 40: 2.2.3 Connecting Output Devices GV-
Page 41 and 42: 2.2.4.B Network Connection 2 GV-AS1
Page 43 and 44: 2.3.1.A Adding a Card 2 GV-AS110 Co
Page 45 and 46: Set Alarm Event Door/Gate Function
Page 47 and 48: 2.4 Web-Based Configurations 2 GV-A
Page 49 and 50: Firmware update Flashes red, green
Page 51 and 52: 3. GV-AS120 Controller
Page 53 and 54: 3 GV-AS120 Controller GV-AS120 can
Page 55 and 56: Wire color Definition Red 12V Black
Page 57 and 58: 3.2.3 Connecting Output Devices GV-
Page 59 and 60: 3 GV-AS120 Controller To define ID
Page 61 and 62: 3.3 Programming Mode 3 GV-AS120 Con
Page 63 and 64: 3.5 LED Status and Beeper 3 GV-AS12
Page 65 and 66: 4. GV-AS400 Controller
Page 67 and 68: 4.1.3 GV-AS400 Board Layout RS-485
Page 69 and 70: 4.2.1.A Wiegand Readers 4 GV-AS400
Page 71 and 72: 4.2.2 Connecting Input Devices 4 GV
Page 73 and 74: 4 GV-AS400 Controller To connect an
Page 75 and 76: 4.2.4 Connecting the PC Figure 4-8
Page 77 and 78: 4.2.7 Fitting the Battery 4 GV-AS40
Page 79 and 80: 4.3.3 Restoring Factory Defaults 4
Page 81 and 82: 5. When the Upgrade is complete, th
Page 83 and 84: 4.4.3 Advanced Settings 4 GV-AS400
Page 85: 4 GV-AS400 Controller � Authentic
Page 89 and 90: [Common Password] 4 GV-AS400 Contro
Page 91 and 92: 4.4.3.D Input Function 4 GV-AS400 C
Page 93 and 94: 4.4.3.E Output Function 4 GV-AS400
Page 95 and 96: GV-AS400 Controller • When Gate #
Page 97 and 98: 4 GV-AS400 Controller Click Reset b
Page 99 and 100: 4 GV-AS400 Controller [GeoFinger Fu
Page 101 and 102: 4.5.2 Operation 4 GV-AS400 Controll
Page 103 and 104: 4.6 GV-AS Power Board 4 GV-AS400 Co
Page 105 and 106: 4 GV-AS400 Controller To connect an
Page 107 and 108: 4.7 GV-AS400 Specifications CPU 8-b
Page 109 and 110: 5.1 Optional GV-ASBox 5 Optional De
Page 111 and 112: 5.1.4 Installation This section des
Page 113 and 114: Figure 5-3 5 Optional Devices To de
Page 115 and 116: 5 Optional Devices To connect an ou
Page 117 and 118: 5.1.5 Web-Based Configurations of G
Page 119 and 120: 5 Optional Devices 2. Click default
Page 121 and 122: After Installation, the program wil
Page 123 and 124: Connection over Internet 5 Optional
Page 125 and 126: Configuring GV-AS100/GV-AS110/GV-AS
Page 127 and 128: 5.1.5.C Updating Firmware To update
Page 129 and 130: 5.1.5.E Advanced Settings 5 Optiona
Page 131 and 132: [Door/Gate A] Select the function t
Page 133 and 134: 5.1.5.E.b Parameter Setting 5 Optio
Page 135 and 136: [Alarm] 5 Optional Devices Select Y
Page 137 and 138:
5.1.5.E.c Status Monitor In the lef
Page 139 and 140:
5.1.5.E.e Time Setting In the left
Page 141 and 142:
5 Optional Devices 3. Input Type: C
Page 143 and 144:
Output Function Settings: 5 Optiona
Page 145 and 146:
Output Condition Settings: 5 Option
Page 147 and 148:
5.1.5.E.g Extended Reader 5 Optiona
Page 149 and 150:
5.2 Optional GV-ASNet 5 Optional De
Page 151 and 152:
5.2.4 Installation This section des
Page 153 and 154:
5.2.4.C Other Settings 5 Optional D
Page 155 and 156:
5.2.5.B Advanced Settings 5 Optiona
Page 157 and 158:
[Delete MasterCard] � Delete: Cli
Page 159 and 160:
[Events] Set the parameters for the
Page 161 and 162:
[Common Password] 5 Optional Device
Page 163 and 164:
5.2.5.B.d Time Setting In the left
Page 165 and 166:
5.2.6 GV-ASNet Specifications CPU 8
Page 167 and 168:
6.1 Introduction 6 GV-ASManager Qui
Page 169 and 170:
6.2.2 Installing the GV-ASManager 6
Page 171 and 172:
6.2.3 Logging in 6 GV-ASManager Qui
Page 173 and 174:
6 GV-ASManager Quick Start Guide 6.
Page 175 and 176:
6 GV-ASManager Quick Start Guide 4
Page 177 and 178:
6 GV-ASManager Quick Start Guide No
Page 179 and 180:
6 GV-ASManager Quick Start Guide 3.
Page 181 and 182:
2. Click the New button on the tool
Page 183 and 184:
6.4.3.B Adding a Group of Cards 6 G
Page 185 and 186:
7 Troubleshooting Q1: GV-ASManager
Page 187 and 188:
7. The connection between the GV-AS
Page 189:
7 Troubleshooting Q6: The GV-ASMana
show all

GV-AS Controller User Manual - ApexCCTV

Create successful ePaper yourself

Delete template?

Save as template?