Operation Manual KEH-P7950 - Pioneer
Operation Manual KEH-P7950 - Pioneer
Operation Manual KEH-P7950 - Pioneer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Activating Internal Speaker ON/OFF (SP)<br />
This feature allows you to select whether or not the speaker output is sounded when the<br />
“DFS Alarm” is triggered. Initially from the factory the speaker output is activated.<br />
Toggling between 5, ∞ buttons allows you to deactivate or activate the “Internal<br />
Speaker”. If you switch the speaker output OFF, you can not change the “TEST MODE”.<br />
Speaker Volume Output Adjustment (T.VOL)<br />
If the “Internal Speaker Output” has been selected then it is possible to adjust the volume<br />
of the speaker output for when the Alarm is triggered. To adjust the volume you must<br />
engage the “TEST MODE”.<br />
Note:<br />
• If the “Internal Speaker Output” is selected, then this menu will not appear.<br />
1. Select the “TEST MODE”<br />
with the 3 button.<br />
2. Press the 5 button to switch<br />
the “TEST MODE” ON.<br />
In this mode the speakers will<br />
sound.<br />
3. Decrease or increase the volume<br />
with the VOLUME.<br />
Display shows 22 – 62.<br />
4. After setting volume, switch<br />
the “TEST MODE” OFF with<br />
the ∞ button.<br />
5. Cancel the “TEST MODE”<br />
with the 2 button.<br />
6. Press the FUNCTION button<br />
to move to the next selection.<br />
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS<br />
44