13.07.2015 Views

FR - Medisana

FR - Medisana

FR - Medisana

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

GB3 OperatingFirst massages in neck/shoulder are presented by rotating neck/shouldermassage heads , to be added directly by full back region massages. Therotating back massage heads move from the entire bottom (start position)to the entire top. Simultaneously heat in the back and vibration in the seat areactivated, while intensity of vibration is set on highest level. The LEDs show thecurrent massage regions and functions. The device will stop once all functionsworked.Neck button Switch on the device by pressing On/Off button .Neck button is for the neck/shoulder reversible kneading massage. Press thisbutton once, left massage head is kneading counterclockwise; right massagehead is kneading clockwise. Press it a second time, directions change. Pressbutton a third time, neck massage stops.Adjust buttons ( ▼ ▲ )Activate the neck massage function by pressing the neck button . Use theAdjust buttons to position the height level of the neck massage heads .Press and hold the ▼ or ▲ button until the favoured position is reached.Shiatsu Massage button Switch on the device by pressing On/Off button . Activate the Shiatsu massagefunction by pressing the Shiatsu massage button . Select the region you wishto massage with the back massage button ( / / ).Lower button (lower back)The Shiatsu massage heads travel up and down the lower half of the backin a circular motion. The reversal of the direction of rotation takes place whenthe respective end positions are reached.Upper button (upper back)The Shiatsu massage heads travel up and down the upper half of the backin a circular motion. The reversal of the direction of rotation takes place whenthe respective end positions are reached.Full button (full back)The Shiatsu massage heads move from the “Park” position at the base ofthe backrest, up to the shoulder area, massaging the back in a circular motionwhilst doing so. Once the uppermost position has been reached, the directionof rotation of the massaging heads is reversed. The heads then travel down tothe base of the backrest. Once the heads reach this point, the direction ofrotation is reversed again and then travel up the back again.Press the button again to de-activate the Shiatsu massage function.18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!