FR - Medisana

3 OperatingGBSpot massage button (▲ ▼)Switch on the device by pressing On/Off button . Only under shiatsu state spotmassage for back will response. Activate the Shiatsu function state by pressingthe Shiatsu massage button . Massage heads rotate in a spot. Pressing andholding the spot massage button changes position of massage heads upwardor downward. Press ▲ or ▼ until the desired position is reached and loose thebutton . Press button again to de-activate the spot massage function andreturn to Shiatsu state.Rolling massage button Switch on the device by pressing On/Off button . Activate the Rollingmassage function by pressing the Rolling massage button . Select the regionyou wish to massage with the back massage button ( / / ).Lower button (lower back)The massage rolls travel up and down the lower half of the back. Thereversal of the direction takes place when the respective end positions arereached.Upper button (upper back)The massage rolls travel up and down the upper half of the back. Thereversal of the direction takes place when the respective end positions arereached.Full button (full back)The massage rolls move from the “Park” position at the base of thebackrest, up to the shoulder area, massaging the back whilst doing so. Oncethe uppermost position has been reached, the direction of the massaging rollsis reversed. The heads then travel down to the base of the backrest. Once theheads reach this point, the direction is reversed again and then travel up theback again.Press the button again to de-activate the rolling massage function;▼Width button ( )▼This button is effective only in the rolling massage state. Press the rollingmassage button to activate the rolling massage function.Pressing and holding the width button , the distance between the rollsincreases or decreases until the desired width is reached and you loose the button.19