Axis P3367-VE Installation Guide - Use-IP

Page 16 AXIS P33-VE Series Network Camera Installation GuideAdjust the LensOpen the Live View page in the web interface and make the following adjustments to the camera:Horizontal lineTilt adjustment screwLocking screwTilt adjustment screw1. Loosen the locking screw and tilt adjustment screws.2. Turn the lens (with the lens holder) to the desired position. Make sure the horizontal lines oneither side of the lens are aligned horizontallyNote: Ensure that the mark on the lens cover, between the horizontal lines, is facing up.3. Once satisfied, gently tighten the locking screw and tilt adjustment screws to secure thecamera’s position.4. Open the Focus Adjustment page in the Web interface under Setup > Basic Setup > Focus &Zoom, and follow the on-screen instructions. Use the image window to adjust the focus andzoom. See the online help files for more information.Note: Due to the dome’s refraction, the image may appear slightly out of focus once the dome has beenplaced. To correct this go to the Focus Adjustment page in the Web interface under Setup > BasicSetup > Focus & Zoom, and adjust the focus again.Warning! Adjusting the focus and zoom manually can damage the lens.