Viking Professional Stand Mixer - Viking Range Corporation

ASSEMBLING THE VIKING PROFESSIONAL STAND MIXER
TO ATTACH STAINLESS STEEL MIXING BOWL
• Turn the head lift release lever counter-clockwise
to release the head and raise until it locks.
• Place the mixing bowl into the bottom, pre-cut
slots and turn clockwise to lock into base.
• To lower the mixer head: turn the head lift
release lever counter-clockwise to release the
head and slowly lower it until it locks.
TO INSERT AND REMOVE A STANDARD ACCESSORY
(V-BEATER, STAINLESS STEEL WHIP, DOUGH HOOK)
• Turn the head lift release lever counter clockwise
to release the head and raise until it locks.
• Place the tool in the tool receptacle and easily
turn counter-clockwise until it stops; push
the tool into the receptacle.
• To remove the tool, simply unscrew, clockwise.
• To lower the mixer head: turn the head lift
release lever counter-clockwise to release the
head and slowly lower it until it locks.
TO RAISE AND LOWER THE LEVER ACTION HEAD
• To raise the head: turn the head lift release lever
counter-clockwise to release the head and
raise it until it locks.
• To lower the mixer head: turn the head lift
release lever counter-clockwise to release the
head and slowly lower it until it locks.
TO MOVE STAND MIXER USING EXCLUSIVE EASY-GLIDE WHEELS
• Make sure head is locked in down position and
stainless steel bowl is locked securely in place
• Lift up on front of mixer using bowl handle
or mixer head
• Now easily move mixer to desired
location
4