NatUral GaS Grill oWNEr'S maNUal 3100 & 4100 - Weber.com
NatUral GaS Grill oWNEr'S maNUal 3100 & 4100 - Weber.com
NatUral GaS Grill oWNEr'S maNUal 3100 & 4100 - Weber.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
aNNUal maiNtENaNcE<br />
rEPlaciNG thE maiN bUrNErS<br />
1) Your Ducane ® gas barbecue must be “OFF” and cool.<br />
2) Turn “OFF” gas at source.<br />
3) Remove the cooking grate and the heat distribution plates, exposing the burner<br />
tubes.<br />
4) Remove front panel knobs, bezels and igniter Module for electronic ignition for the<br />
burners.<br />
5) Then remove the front panel.<br />
See: inspection of the Spider/insect Screens for removal of the burner tube.<br />
To reassemble, reverse steps 3 through 5 above.<br />
m caUtioN: the burner openings (1) must be positioned<br />
properly over the valve orifices (2). check proper assembly<br />
before fastening manifold/front panel in place.<br />
m WarNiNG: after reinstalling the gas lines, they should be<br />
leak checked with a soap and water solution before using<br />
the barbecue.<br />
1<br />
2<br />
battEry rEPlacEmENt oF bUrNEr iGNitEr<br />
Unscrew the push button igniter and remove the old battery and replace with a new one.<br />
Requires 1 “AA” alkaline battery. The shrink wrap must be removed from the battery<br />
before installation.<br />
30 www.ducane.<strong>com</strong>