You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EN<br />
EN<br />
LOOK HSC 675 FORK<br />
LOOK HEAD FIT 4 INTEGRATED HEADSET<br />
The LOOK forks <strong>com</strong>prise a conical roller bearing surface, designed to receive it directly, thereby<br />
eliminating the need for a traditional fork cone.<br />
They conform to the EN 14 781 standard.<br />
Fig. a<br />
Cutting line<br />
Specific feature of the headset:<br />
The new LOOK Head Fit 4 headset is a patented system offering several improvements.<br />
It makes it possible to dissociate the adjustment of the headset from the adjustment of the<br />
stem. These two functions be<strong>com</strong>e independent of each other, which allows for simpler<br />
adjustment of the stem and better precision of the adjustment of the headset.<br />
Moreover, this increases the working life of the bearings of the headset when substantial<br />
force is applied to the handlebar.<br />
Conical flange collar 36°<br />
Diam 1’’1/2<br />
DESCRIPTION OF THE HEADSET:<br />
LOWER PART:<br />
• Single-piece bearing 36° x 45°, outside<br />
diameter 52 mm.<br />
UPPER PART:<br />
• Single-piece bearing 36° x 45°, outside<br />
diameter 41 mm.<br />
• Bearing <strong>com</strong>pression cone 1’’1/8<br />
• Pin<br />
• Tightening nut<br />
• Pin hole plug<br />
Stem cap<br />
Compression kit<br />
Stem<br />
Rubber spacer<br />
Tightening nut<br />
Pin and plugs<br />
Threaded insert<br />
Compression cone<br />
Upper bearing ring<br />
Head tube<br />
Lower bearing<br />
ring<br />
Fork<br />
Fig. b<br />
18 19
Change language