houtklover holzspalter log splitter fendeuse a ... - VRB Friesland BV
houtklover holzspalter log splitter fendeuse a ... - VRB Friesland BV
houtklover holzspalter log splitter fendeuse a ... - VRB Friesland BV
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8. TROUBLE SHOOTING<br />
Make sure the <strong>log</strong> <strong>splitter</strong> is unplugged, before carrying out any maintenance<br />
jobs.<br />
PROBLEM PROBABLE CAUSE REMEDY SUGGESTED<br />
The machine fails to split<br />
<strong>log</strong>s.<br />
The <strong>log</strong> pusher moves<br />
jerkily, taking unfamiliar<br />
noise or vibrating a lot.<br />
Oil leaks around cylinder<br />
ram or from other points.<br />
Log is improperly<br />
positioned.<br />
The sizes or hardness of<br />
the <strong>log</strong> exceeds the<br />
capacity of the machine.<br />
Wedge cutting edge is<br />
blunt.<br />
Oil leaks.<br />
Unauthorized adjustment<br />
was made on max.<br />
pressure limiting screw.<br />
Lower max. pressure<br />
rating was set.<br />
Lack of hydraulic oil and<br />
excessive air in the<br />
hydraulic system.<br />
Air sealed in hydraulic<br />
system while operating.<br />
Bleed screw is not<br />
tightened before moving<br />
the <strong>log</strong> <strong>splitter</strong>.<br />
Oil drain bolt with dipstick<br />
is not tight.<br />
Hydraulic control valve<br />
assembly and/or seal(s)<br />
worn.<br />
Refer to chapter<br />
5. OPERATION.<br />
Reduce the <strong>log</strong> sizes<br />
before splitting it on the<br />
<strong>log</strong> <strong>splitter</strong>.<br />
Refer to chapter<br />
7. MAINTENANCE.<br />
Locate leaks and contact<br />
the dealer.<br />
Contact the dealer.<br />
Check oil level for<br />
possible oil refilling.<br />
Contact the dealer.<br />
Loosen bleed screw by<br />
some rotations before<br />
operating the <strong>log</strong> <strong>splitter</strong>.<br />
Tighten the bleed screw<br />
up before moving the <strong>log</strong><br />
<strong>splitter</strong>.<br />
Tighten the oil drain bolt<br />
with dipstick.<br />
Contact the dealer.<br />
30