SOLIUS - Atlantic-comfort.com

More documents

Recommendations

Info

AUTOMATICALLY LOWERING THE TEMPERATURE IN YOUR ROOM: HOW TO USE ECO MODE This involves a lowering of the temperature by around 3.5°C with respect to the Comfort temperature , set on the control knob C. We re<strong>com</strong>mend that you use this mode when you will be absent for 2 to 24 hours, or during the night, especially in bedrooms. GB Set the cursor A to position The Comfort temperature will be lowered by about 3.5°C. A PROG This mode enables you to lower the temperature automatically without altering the Comfort setting on the control knob C. 29
If you have a programmer: PROGRAMMING THE HEATING PERIOD: HOW TO USE PROG MODE Using the programming, you can adjust your panel heater’s settings to suit your lifestyle. By connecting the pilot wire to a programmer, or if you use an on-board programmer (available as an option), you can programme your Comfort and temperature periods (please refer to the instructions included with your programmer). You can connect several appliances to one programmer. The temperature set on the control knob C is the base temperature that will serve as a reference for the desired temperature according to the programming. Order on your programming box COMFORT -1°C COMFORT -2°C ECO FROST STOP Lower -1°C with respect to the setting on the knurled knob C -2°C with respect to the setting on the knurled knob C -3.5°C with respect to the setting on the knurled knob C Ambient temperature held at around 7°C. Immediate switch off of the heating (used to disconnect the power). Set the Comfort temperature that will serve as a base for programming my reductions in temperature: Set the temperature control knob C to the desired temperature. 1 2 Set the cursor A to position A C E PROG NB : When there are no instructions from the pilot wire, the appliance heats in Comfort mode . The instructions for Frost and Stop take priority over Eco mode and Comfort mode . The changeover time is around 12 seconds when switching from Comfort mode to Eco mode 30 The heating light E illuminates if the room’s ambient temperature is below the desired temperature for the selected mode (Comfort temperature in Comfort mode and reduced temperature in Eco mode ).
Page 1 and 2: Notice d’utilisation et d’insta
Page 3 and 4: Nous vous remercions de votre choix
Page 5 and 6: DEVERROUILLER LA PATTE D’ACCROCHA
Page 7 and 8: VERROUILLER LE PANNEAU RAYONNANT SU
Page 9 and 10: Utilisation CHAUFFER VOTRE PIECE :
Page 11 and 12: Si vous disposez d’un programmate
Page 13 and 14: ACTIVER LA FONCTION DETECTION D’A
Page 15 and 16: Conseils Il est inutile de mettre l
Page 17 and 18: LIMITER LA PLAGE DE REGLAGE DE LA M
Page 19 and 20: EN CAS DE PROBLÈME PROBLÈME RENCO
Page 22 and 23: Contents Warning...................
Page 24 and 25: Installation PREPARING THE INSTALLA
Page 26 and 27: CONNECTING THE PANEL HEATER Connect
Page 28 and 29: Operation You can run your panel he
Page 32 and 33: HOW TO USE THE ENERGY-SAVING FUNCTI
Page 34 and 35: All the panel heaters in the same r
Page 36 and 37: IF YOU WILL BE ABSENT FOR A PERIOD
Page 38 and 39: LOCKING THE CONTROL KNOB FOR THE EN
Page 40 and 41: PROBLEM CHECKS TO BE MADE ENCOUNTER
Page 42: GARANTIE Document à conserver par

SOLIUS - Atlantic-comfort.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?