Solar Inverter Service Software Kit - Delta Energy Systems

8
NOTICE
If the currently loaded confi guration was not explicitly saved, the "Delete confi guration"
message box will pop up to give the opportunity to cancel the opening of the new confi guration,
to allow saving of the actual confi guration before (see fi gure 5-3).
NOTICE
The confi guration fi les are in XML format. For that reason the "Open" dialog is only showing
XML fi les (.xml).
"Save" button
With the "Save" button it is possible to save the actual loaded confi guration, that
is visible in the "Confi guration pane". In the "Save as" dialog, please choose a
location, enter a descriptive name and click on the "Save" button.
NOTICE
The standard location where the "Save" dialog opens is the user’s application data folder.
In this folder is also saved the default confi guration loaded at startup.
"Delete" button
The "Delete" button removes the entire loaded confi guration, which is actually
visible in the confi guration pane.
Figure 5-3: Delete confi guration
"Eject" button
The "Eject" button is used to close the COM port.
If the actual confi guration was not saved, a message
box opens asking to confi rm the action (see fi gure 5-3).
Click "Yes" to confi rm the removing of the actually
loaded confi guration. Click "No" to cancel and do not
change the actual confi guration.
5.2.1.2 Tab section: "Selected inverter"
Depending on the selected inverter, the "Selected inverter" section can contain the following
functions:
"Show" button
Clicking the "Show" button will open the solar inverter view of the device node
selected in the confi guration pane.