Solar Inverter Service Software Kit - Delta Energy Systems

5.2.2 Inverter tab
The inverter tab is activated when the view of an inverter is opened. It can also be activated
by clicking on the inverter tab.
Figure 5-8: Inverter tab
• Update inverter: Operations that are performed on the actual solar inverter
• Update view: Operations that change the actual solar inverter view
• Manage settings: Manage the settings of the actual solar inverter
5.2.2.1 Tab section: "Update inverter"
This tab section contains operations allowing some changes of an inverter. The changes will
affect the device actually opened in the solar inverter view pane.
"Send" button
The "Send" function sends all the changed settings to the solar inverter. The
settings are not saved permanently to the solar inverter. All the changed settings
will be lost after a reboot of the solar inverter.
"Send to all" button
The "Send to all" function sends the changed setting from all tabs to the solar
inverter. The settings are not saved permanently to the solar inverter. All the
changed settings will be lost after a reboot of the solar inverter.
"Save" button
The "Save" function saves the changed settings to the solar inverter permanently.
The settings will still be present even after the solar inverter was shut down.
"Firmware" button
Refer to section 5.5.2 for detailed information.
12