Operation Manual Pressure Washer

1. Locate and remove all looseparts from the carton.2. Cut four corners of the carton fromtop to bottom and lay the panelsflat.ASSEMBLY INSTRUCTIONS4. Connect wand to gun. Tightensecurely.5. Attach highpressure hoseto gun. Tightense cure ly.6. To Assemble Accessories Panela. Align the screw boss on theaccessories panel assemblywith the hole in the handleand slide accessories panelassembly onto handle.ScrewBossHandle3. Place handle onto frame, depressthe snap buttons, and slide thehandle assembly onto the frameuntil snap buttons snap into place.b. Secure accessories panelassembly to handle withscrews. Do not overtighten.ScrewsRisk of personalinjury. Avoidplacing hands between handle andframe when assembling to preventpinching.7. Roll the unit off the carton anddiscard carton.NOTE: The pump on this unit ismaintenance free and requires no oil,If there is a problem with the pumpcontact an Authorized Service Center.A166378- ENG