InPro 7200 Series Instruction manual ... - Mettler Toledo

InPro 7200 Series 113 Sensor ApplicationsNotes:– PEEK is a thermoplastic material with excellent strength andchemical resistance properties over a wide range of processtemperatures and pressures. METTLER TOLEDO recommendsusing PEEK preferentially for all applications that qualify.– PEEK material displays excellent chemical resistance tomost aqueous solutions of acids, bases, and salts. It is alsoexcellent for organic solvents such as toluene, ethyl acetate,acetone, gasoline, and carbon tetrachloride. It is notrecommended for sulfuric or nitric acid solutions above70 %, nor is it recommended for Oleum applications.SensorDesignationInPro 7200InPro 7201InPro 7202ApplicationThis sensor is suitable for the majority of all electrodelessconductivity applications. Its compact size enablesit to be mounted in a multitude of methods, including insertion(flange, bushing), and immersion. Typical applicationsinclude salinity and brine measurements, steelpickling, scrubbing towers, ion exchange regeneration,plating baths, rinse water, caustic metal cleaning, andtextile measurements in scouring, mercerizing, and carbonizingbaths.This sensor is identical in physical size and appearanceto the InPro 7200 sensor and may be applied to any ofthe applications identified which have intermittent or continuouslyhigh temperatures. Additional high temperatureapplications for which this sensor is suited includealumina-to-caustic ratio, boiler blowdown, and Cleaning-In-Place(CIP) measurements in food and relatedindustries.This general purpose, sensor may be used for most routineapplications involving low (