InPro 7200 Series Instruction manual ... - Mettler Toledo

InPro 7200 Series 154.5 Immersion InstallationFor open tanks or inlet channel the sensor can be installed in animmersion housing InDip 550Ind.Figure 5: Immersion housing “InDip 550Ind”4.6 In-Line InstallationFor in-line applications within a metal or plastic pipe, the pipemust have a minimum diameter of DN80 (3"), and the sensorshould be aligned as closely as possible with the centerline ofthe pipe.Larger pipe diameter should be used wherever possible.Note: Whenever the minimum size pipe diameter is used, thesystem should be calibrated with the sensor in place and witha solution of known conductivity (within the range of the instrument’scalibration).© 08/04 Mettler-Toledo GmbH, CH-8606 Greifensee InPro 7200 SeriesPrinted in Switzerland 52 001 408