DULCOTESTÂ® DT1 Photometer - ProMinent Canada

More documents

Recommendations

Info

Calibration ModeNoteSeparate calibration of the measuring ranges for chlorine dioxide,bromine and ozone is not possible. The unit uses the calibrationfor the chlorine measuring range. Factor of 1.9 is used to calculatechlorine, factor 2.25 is used to calculate bromine and factor0.67 is used to calculate ozone, respectively, from the chlorinepolynomial.CALFactory calibration active.cALCalibration has been set by the user.Recommended calibration valuesChlorine: between 0.5 and 1.5 mg/lpH: between 7.6 and 8.0Cyanuric acid: between 30 and 60 mg/l24
Calibration ModeUser calibrationFactory calibration: cAL: CALTo reset the calibration to the factory setting:ModeZeroTestPress both the MODE and ZERO/TEST keys and keep themdepressed.OnOffSwitch the unit on using the ON/OFF key. Release the MODE andZERO/TEST keys after approx. 1 second.SELCALSELcALThe display shows the following in alternating mode:The calibration is reset to the factory setting.(SEL stands for Select)or:ModeCalibration has been set by the user. (If the user calibration is tobe retained, switch the unit off using the ON/OFF key.)SELCALOnOffCalibration is reset to the factory setting by pressing the MODEkey. The following messages will appear in turn on the display:Switch the unit off using the ON/OFF key.User notesE 10E 70E 72E 74E 71E 73E 75Calibration factor "out of range"Cl: Manufacturing calibration incorrect / erasepH: Manufacturing calibration incorrect / eraseCys: Manufacturing calibration incorrect / eraseCl: User calibration incorrect / erasepH: User calibration incorrect / eraseCys: User calibration incorrect / erase25
Page 1: DULCOTEST ® DT1PhotometerBetriebsa
Page 4 and 5: 1 FunktionsbeschreibungInbetriebnah
Page 6 and 7: 3 MethodenChlor 0,05 - 6,0 mg/l(a)
Page 8 and 9: MethodenChlordioxid 0,1 - 11 mg/l0.
Page 10 and 11: 4 KalibriermodusModeTaste MODE drü
Page 12 and 13: KalibriermodusAnwender-Kalibrierung
Page 14 and 15: 6 Hinweise zu den chemischen Method
Page 16 and 17: Instruction ManualGBContent1. Funct
Page 18 and 19: 2 General notesUser messagesEOI÷Er
Page 20 and 21: 3 MethodsBromine 0.1 - 13 mg/l0.0.0
Page 22 and 23: 3 MethodspH-value 6.5 - 8.40.0.0Per
Page 26 and 27: 5 Avoiding errorsAvoiding errors in
Page 28 and 29: 6 Chemical method notesIn order to
Page 30 and 31: 1 Description de la fonctionMise en
Page 32 and 33: 3 MethodesChlore 0,05 - 6,0 mg/l(a)
Page 34 and 35: 3 Methodes0.0.0ZeroTestCdORESULTATD
Page 36 and 37: 4 Mode de calibrageModeAppuyer sur
Page 38 and 39: Mode de calibrageCalibrage utilisat
Page 40 and 41: 6 Remarques aux méthodes chimiques
Page 42 and 43: InstruccionesEIndice1. Descriptión
Page 44 and 45: 2 Observaciones generalesObservacio
Page 46 and 47: 3 MétodosBromo 0,1 - 13 mg/l0.0.0Z
Page 48 and 49: 3 MétodosValor de pH 6,5 - 8,40.0.
Page 50 and 51: Modo de calibraciónObservaciónNo
Page 52 and 53: 5 Evitación de erroresCómo evitar
Page 54 and 55: 6 Observaciones para los métodos q

DULCOTESTÂ® DT1 Photometer - ProMinent Canada

Create successful ePaper yourself

Delete template?

Save as template?