Samsung 40", UE40D6300WXZF, série 6, SMART TV, 3D, FULL HD, LED TV (UE40D6300SSXZF ) - Manuel de l'utilisateur 15.31 MB, pdf, Anglais

Problem
Possible Solution
I want to start Anynet+.
••
Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+
Setup menu.
••
Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
I want to exit Anynet+.
••
Select View TV in the Anynet+ menu.
••
Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
◀
The message “Connecting to
Anynet+ device...” appears on
the screen.
••
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
••
Use the remote control when the Anynet+ setting or switching to
view mode is complete.
▶
The Anynet+ device does not
play.
• • You cannot use the play function when Plug & Play (initial setup) is
in progress.
English