CoolAir RT880, SP950 - Waeco

Conventions in this manualCoolAir RT880, SP9501.1.1 Handling electrical cables• Use cable ducts to lay cables through walls with sharp edges.• Do not lay loose or bent cables next to electrically conductive materials(metal).• Do not pull on the cables.• Attach and lay the cables in such a manner that they cannot be trippedover or damaged.• The electrical power supply may only be connected by a specialistworkshop.• Fit a fuse of 25 amps to the connection to the vehicle's power supply.• Never lay power supply lines (battery leads) in the vicinity of signal orcontrol cables.2 Conventions in this manual2.1 General information on the installation manualThis installation manual contains the essential information and instructionsfor installing the air conditioning roof unit. The information containedis orientated towards the company installing the air conditioning roof unit.The following instructions are intended to help you properly use theinstallation manual:• The installation manual is part of the scope of delivery and should bestored carefully.• The installation manual provides you with important information on theinstallation of the device and can also be used as a reference materialin the event of repairs.• The manufacturer assumes no liability for non-observance of this installationmanual. Any claims are excluded in this case.2.2 Target groupThe installation and configuration information in this manual is intendedfor qualified installation personnel who are familiar with the guidelinesand safety precautions to be applied during the installation of lorry accessoryparts.34EN